Advertisement
This manual corresponds to the following reference:
F1204
Packing List
The following items are included:
Silicon Tube ............................................. 1 unit
Clamp ...................................................... 4 units
Features and Connections
F1204 Fume Extractor* for AP250 Manual
Feed Soldering Iron is used to suck the fume
generated at the solder joint.
A suction pump with filter is required to
generate the suction power (suction pump is
not distributed by JBC).
The fume extractor tube comes with a
diameter of 6 mm (0.236 in) and a tube length
of 2 m (78.74 in).
* Fume extractor is also compatible with the discontinued AP130 Solder Feed Iron
** Not included, sold separately
2
Suction Nozzle
with Tube Connector ............................ 1 unit
Manual ...................................................... 1 unit
Ref.: 0031928
Suction Tube
Connect the
suction tube to the
suction pump with filter
Tube Connector
Suction Nozzle
AP250**
Manual Feed Soldering Iron
Connect the
tool cable to the
soldering station
Advertisement
