Combine; Divide - Yamaha MDX-595 Owner's Manual

COMBINE

This function lets you combine two consecutive tracks into
one. After you combine the tracks, the total number of
tracks decreases by one and the tracks following the
combined tracks are renumbered.
NATURAL SOUND MINIDISC RECORDER MDX–595
)
POWER EJECT
TIMER
OFF
REC PLAY
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE
CANCEL 3
1
Press & to stop playback.
2
Turn the jog dial to select the second track of the
two you want to combine.
3
Press EDIT repeatedly to display "Combine ?",
then press ENTER.
"Check" appears momentarily, then the unit plays the 4
seconds before and after the point where the tracks will be
connected. "(track number) + (track number) OK?" appears in
the display.
4
Press ENTER again.
The tracks are combined and "Complete" appears
momentarily.
To cancel before combining the tracks
Press CANCEL (or &).
To undo COMBINE
Press & to set this unit to stop mode.
1
2 Press EDIT repeatedly to display "Undo Combine",
then press ENTER.
"Undo OK ?" appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or &).
Notes
• This operation is not possible when track 1 is selected.
• You can also divide the track later using the DIVIDE function.
• If "Can't Edit" appears in the display, the tracks cannot be
combined. This sometimes happens when you have edited
the same track many times. This is due to the technical
limitations of the MD system and is neither a mechanical error
nor a malfunction.
#˜* &
REC
DIGITAL ANALOG
– +
REC LEVEL REC LEVEL PHONES LEVEL
$ ›
! ⁄
CHARA. DELETE EDIT SET SEARCH INPUT
CANCEL ENTER
0 10 0 10
2
3,4 1

DIVIDE

This function lets you divide one track into two separate
tracks by adding a new track number to a certain point in
the track. If you add a track number at the beginning of a
section you want to hear, you can access it quickly by
using the skip function during playback. After you divide a
track, the total number of tracks increases by one and the
tracks following the divided tracks are renumbered.
NATURAL SOUND MINIDISC RECORDER MDX–595
) EJECT
POWER
TIMER
OFF
REC PLAY
RANDOM S/F REPEAT A–B DISPLAY SCROLL TITLE CHARA.
3
CANCEL
1
Press #/* to play the track you want to divide.
2
Use SEARCH ! or ⁄ to locate the point
where you want to divide the track, then press
#/* to pause at that position.
3
Press EDIT repeatedly to display "Divide ?", then
press ENTER.
"Check" appears momentarily, then "Divide OK ?" appears
and the unit starts repeating the point where the track will be
divided.
4
If necessary, use the jog dial to adjust the
position of the point where the track will be
divided.
The divide position can be adjusted up to 2 seconds (255
steps) in either direction.
5
Press ENTER.
The track is divided and "Complete" appears
momentarily.
To cancel before dividing the track
Press CANCEL (or &).
To undo DIVIDE
Press & to set this unit to stop mode.
1
2 Press EDIT repeatedly to display "Undo Divide", then
press ENTER.
"Undo OK ?" appears in the display.
3 Press ENTER again to undo.
To cancel, press CANCEL (or &).
Note
You can also combine the tracks later using the COMBINE
function.
1,2
2
&
#˜* &
REC
DIGITAL
ANALOG
– REC LEVEL + REC LEVEL PHONES LEVEL
$ ›
DELETE EDIT SET ! SEARCH ⁄ INPUT
CANCEL ENTER
0 10 0 10
3,5 4
21