Download Print this page
HIKVISION DS-KH7300EY Series Quick Start Manual
HIKVISION DS-KH7300EY Series Quick Start Manual

HIKVISION DS-KH7300EY Series Quick Start Manual

Indoor station
Hide thumbs Also See for DS-KH7300EY Series:

Advertisement

Quick Links

Quick Guide
Appearance and Interface
DS-KH7300EY Series
Indoor Station
190.2 mm
Quick Start Guide
Touch Screen
UD32947B-A
Microphone
Debugging Port
(For debugging
use only)
Speaker
Wiring Terminal
1 Set Physical Address
Door Station
Use the rotary switch to set the building No., door station No., sub door station, outer door station No. and
door open duration. The Tens column refers to the number in Tens, and the Units column refers to the number
in Units. On each rotary switch, 0 to 9 refers to No. 0 to 9.
In total, you can use 1 to 99 to number the building.
If the door station is main door station, the Door Station No. should be set as 0; If it is sub door station, set
Door Station No. as 1~16; If it is outer door station, set Door Station No. as 90~99.
Use the screwdriver to adjust the number. The arrow indicates the number.
For example:
Tens
0
Building No. (1~99)
0
Door Station No.
0
Main Station No.
(Reserved)
It is recommended to stick the supplied
number remark on the back of the device to
indicate the device's No.
1 Set Physical Address
1.1 Indoor Station rotary Switch Settings
1.2 Door Station/Outer Door Station rotary
Switch Settings
The appearance of the device varies according to different models. Refers to the actual device for detailed
informa�on.
The Wi-Fi indicator light only exists in devices that support Wi-Fi functions.
Indicators will be shown after touching the touch button.
20 mm
Power
Wi-Fi Indicator
Indicator
Off
Flashing
Off
Flashing
Off
Flashing
Touch Button Indicator*(Wi-Fi/
microSD Card Slot
Off
Off
Power/Mute/IN USE)
Flashing
/
Solid
/
Rotary Switch
Off
/
Reset Button
Flashing
/
Solid (After the Wi-
Solid (After
Fi is connected)
powering on)
Indoor Station
No. Settings
Use the rotary switch to set the indoor extension No., the building No., and the
room No. The Tens column refers to the number in Tens, and the Units column
refers to the number in Units.
On each rotary switch, 0 to 9 refers to No. 0 to 9.
In total, you can use 1 to 3 to number the indoor extension No., and use 1 to 99
to number the building or the room.
Use the screwdriver to adjust the number. The arrow indicates the number.
Units
0
Device Mode Settings
Use the rotary switch to set the indoor station's device mode according to actual
The No. is 21.
scenarios.
Villa Mode: Under the villa mode, the device needs to be powered by 12 VDC
Rotary Switch Range of Door Station No.:
0
power supply. More than one device can light up the screen; when the extension
Main Door Station: 0
The No. is 03.
is called, the screen can light up and allow video call.
Sub Door Station: 1~16
Building Mode: In one power supply system, up to 3 indoor extensions can be
Outer Door Station : 90~99
wired to 1 one main indoor station. When the screen of other devices lights up,
0
the IN USE indicator will also lights up. Devices cannot be powered by separate
Door Open Duration
power supply. When the indoor extension is called, the screen will not light up.
Door Open
Rotary Switch
Duration(s)
0
2
1
1
2
3
3
4
DIP 1 and DIP 2 are for mode settings, and DIP 3 and DIP 4 are reserved.
4
5
If DIP 2 is set as 1, the function of Professional Studio can be set.
5
8
The device is on debugging mode when the extension No. is 9. You can operate the indoor station
on debugging mode without connecting to the door station.
6
10
7/8/9
Reserved
2 Wiring
3 Installation
2.1 System wiring
3.1 Before you start
2.2 Wiring
3.2 Installation position
3.3 Flush mounting and surface mounting
2.1 System Wiring
Mute
IN USE
Exception/Condition
Indicator
Indicator
1. Incorrect
switch
rotary
address.
Off
Flashing
2. Same
switch address
rotary
is set for more than 1 indoor
station.
Flashing
Off
Door Station Offline
Exception for Interface of
Off
Off
Connecting Distributor
1. Touch button damaged.
Flashing
Off
2. Touch button connection
exception.
Wi-Fi Enabled with
/
/
Connection Exception
Wi-Fi Enabled with Well
/
/
Connection
/
/
Wi-Fi Disabled
Cloud Service Enabled but
Flashing
/
Offline
Solid (After
Solid when the
Operating Normally
muting)
device is in use
For example:
Tens
Units
1
1
1
0
0
0
DIP1 DIP2
DIP3 DIP4
(Reserved)
1
1
1
0
0
0
DIP1 DIP2
DIP3 DIP4
(Reserved)
4 Power On
Power on and start operation.
Daisy Chain Connection
...
...
...
...
...
Maximum 22 indoor stations with Wi-Fi function or 64 without Wi-Fi function
Power
can be powered by 1 power supply. (The cables should be better than AWG20)
Supply
Maximum 16 distributors (DS-KAD7061) can be cascaded.
About this Document
● This Document includes instruc�ons for using and managing the Product. Pictures, charts, images and all other informa�on hereina�er are for descrip�on
and explana�on only.
● The informa�on contained in the Document is subject to change, without no�ce, due to firmware updates or other reasons. Please find the latest version
of the Document at the Hikvision website (h�ps://www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital Technology Co., Ltd. or its
affiliates (hereina�er referred to as "Hikvision") makes no warran�es, express or implied.
● Please use the Document with the guidance and assistance of professionals trained in suppor�ng the Product.
About this Product
The indoor
This product can only enjoy the a�er-sales service support in the country or region where the purchase is made.
Extension No.
is 01.
Acknowledgment of Intellectual Property Rights
● Hikvision owns the copyrights and/or patents related to the technology embodied in the Products described in this Document, which may include licenses
obtained from third par�es.
The building
● Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this Document may be excerpted, copied, translated, or
No. is 03.
modified in whole or in part by any means without wri�en permission.
and other Hikvision's trademarks and logos are the proper�es of Hikvision in various jurisdic�ons.
● Other trademarks and logos men�oned are the proper�es of their respec�ve owners.
LEGAL DISCLAIMER
The room No.
is 51.
● TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.
1
IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
Villa Mode
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
0
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
● YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
1
● YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
Building Mode
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER
0
PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY
NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
● IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
Star Connection
...
Power
Supply

Advertisement

loading

Summary of Contents for HIKVISION DS-KH7300EY Series

  • Page 1 Use the screwdriver to adjust the number. The arrow indicates the number. obtained from third par�es. The building ● Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this Document may be excerpted, copied, translated, or Tens Units No.
  • Page 2 2.2 Wiring 3 Installation Cable Type Description If a power adapter is provided in the device package, use the provided adapter only. If no power adapter is provided, ensure the power adapter or other power supply complies with 97.2 mm 7.9 mm Limited Power Source.

This manual is also suitable for:

Ds-kh7300ey-wte2/whiteDs-kh7300ey-te2Ds-kh7300ey-te2/white