Yamaha LS9 Editor Installation Manual page 7

Network settings of the LS9
• When connecting the computer to the LS9 directly.
You can use the following initial settings.
IP address
Gateway address
Subnet mask
• When you connect the computer to the LS9 via LAN.
Set the appropriate address in accordance with LAN.
Your computer and the LS9 should exist in the same subnet in the same network address.
IP address
Gateway address
Subnet mask
Network settings of computer
If you are connecting the LS9 to your computer in a one-to-one connection, we recommend that you make the
following settings.
IP address
Subnet mask
Default gateway
However, it must not conflict with the IP address of any other device on the network.
n
The LS9 cannot be directly connected if the IP address is assigned automatically.
Please contact your network administrator for further detail.
LS9 Editor Installation Guide
192.168.0.128
192.168.0.1
255.255.255.0
Sets the IP address so that it does not conflict with the IP address of any other device on
the network.
If you set the IP address, the first three numbers are automatically set. Set the last
number of the IP address of the gateway when the gateway exists. Set the vacant
address when the gateway does not exist.You should set the address in the same
subnet as IP address.The address should be set in the same subnet as IP address
within LAN in which the subnet is set.
Use an initial setting of [255.255.255.0] in LAN environment in which the subnet is not
set. In LAN in which the subnet is set, set the address in accordance with the
environment.
192.168.0.3
255.255.255.0
192.168.0.1
7