When controlling the LS9 from your computer via Ethernet, the LS9 does not operate correctly or
no sound is heard.
• Have you installed the latest DME-N Network Driver?
• Is the Ethernet cable connected correctly?
Connect the computer to the LS9 by using an Ethernet cable via a switching hub or router. When you connect the computer to
the LS9 directly, you can use either a crossover or straight cable. ...............................................................LS9 Owner's Manual
• Is the DME-N Network Driver set up appropriately? Did you enter an appropriate IP address?
...................................................................................................................................... DME-N Network Driver Installation Guide
• Is the computer network setup appropriate?
fi
fi
Select
[Start]
[Settings]
and confirm the network setup. ................................................................................... DME-N Network Driver Installation Guide
• Are the settings of the LS9 and network devices (including hubs) appropriate?
...........................................................................................................LS9 Owner's Manual or Network device's Owner's Manual
• Have you selected an appropriate network ports in the LS9 Editor?
• In case the firewall function is enabled for your Windows XP SP2 Installation, an alert message will be displayed
indicating that the program is blocked during first start-up of LS9 Editor.
In that case, please select the 'Unblock' option.
• In case the firewall Anti Virus (security) function is enabled you might experience problems controlling LS9
console.
In that case, please turn off this firewall function.
LS9 Editor Installation Guide
Troubleshooting
fi
fi
[Control Panel]
[Network Connections]
fi
[Local Area Connection]
...................................... LS9 Editor Owner's Manual
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
fi
[Property],
© 2006 Yamaha Corporation
A0
9