Advertisement
CAUTION:
The TSM-1X Test Switch Module does not perform all of the required smoke detector tests as
specified in NFPA Standard 72. Please refer to the instructions that accompany the smoke
detector for the complete test requirements.
ELECTRICAL RATINGS
Operating voltage
Max average current (RMS)
CONTROL AND INDICATORS
The LED of TSM-1X will mimic the LED of the associated duct detectors or other compatible
intelligent devices. The logic function is setup in the system configuration tool.
The LED flashing rate is shown in the chart below:
A6V101055486_en--_b
Flash Color
Green
Normal supervisory operation
Amber
Device is in trouble
Red
Alarm
No Flashes
No power or need to be replaced
Condition
13 -32 Vdc
500µA
Flash Intervals
(Seconds)
10
4
1
-
Advertisement
