Yamaha MT-09 SP Owner's Manual page 49

TIP
If the warning light does not work as
described above, or if the warning light
comes on while riding, the ABS may
not work correctly. Have a Yamaha
dealer check the vehicle as soon as
possible.
WARNING
If the ABS warning light does not
turn off after reaching 5 km/h (3
mi/h), or if the warning light comes
on while riding:
 Use extra caution to avoid pos-
sible wheel lock during emer-
gency braking.
 Have a Yamaha dealer check
the vehicle as soon as possible.
Shift indicator light " "
This indicator light comes on when it is
time to shift to the next higher gear.
The engine speeds at which it comes
on or goes off and other settings can
be adjusted in the menu system. (See
page 6-33.)
TIP
 The shift indicator light does not
operate when the vehicle is in neu-
tral or 6th gear.
 When the vehicle is turned on, this
light should come on for a few
seconds and then go off. If the
light does not come on, or if the
EWA21120
light remains on, have a Yamaha
dealer check the vehicle.
Smart key system indicator
light " "
This indicator light will flash when com-
munication between the vehicle and
smart key takes place and when cer-
tain smart key system operations are
carried out. The indicator light may
also flash when there is an error in the
smart key system.
EAU99711
TIP
When the vehicle is turned on, the light
should come on for a few seconds and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
Instrument and control functions
Stability control indicator light "
When TCS (traction control system) is
set to off, this indicator will come on.
This indicator light flashes when the
TCS (traction control system), SCS
(slide control system), LIF (lift control
system), or BSR (back slip regulator)
engage while riding.
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
EAU99401
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
NOTICE
When turning the main switch on,
avoid any movement or vibration of
the vehicle as it may interfere with
the initialization of the IMU. If this
occurs, the traction control system
will not operate and the stability
control indicator light "
on until the IMU can initialize.
6-4
EAUA1782
"
6
ECA28540
" will come