Yamaha MT-09 SP Owner's Manual page 35

onds then an alarm will beep to re-
mind the user to turn off the main
switch.
The main switch positions are de-
scribed below.
ON
1 1
2 2
1. Push.
2. Push and turn.
All electrical circuits are supplied with
power, and the engine can be started.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
2. Push the main switch knob and
the smart key indicator light will
come on for approximately 4 sec-
onds.
3. While the smart key system indi-
cator light is on, push and turn the
main switch knob to "ON". All of
EAUA2562
the turn signal lights will flash
twice and the vehicle power will
turn on.
TIP
 If the vehicle battery voltage is
low, the turn signal lights will not
flash.
 See "Emergency mode" on page
9-37 for information on turning the
vehicle power on without the
smart key.
OFF
1. Push and turn.
All electrical systems are off.
To turn the vehicle power off
1. With the smart key turned on and
2. The turn signal lights flash once
TIP
When the main switch is turned to
"OFF" but the smart key cannot be
confirmed (the smart key is either out-
side operation range or has been
4-15
Special features
1 1
within operating range, push and
turn the main switch knob to
"OFF".
and the vehicle power turns off.
EAUA2582
4