Table of Contents
Advertisement
APPENDICES
MELSEC-A
APPENDIX 11. AJ71C24 Setting
Record Form
Use this form to keep record of settings of the AJ71C24 or to create computer
link programs for PC CPUs and computers.
Make duplications of this form and use them.
No. and Data
Enter the number of the record form and the date on the top right corner
of the form.
Settings of the buffer memory special applications area
Enter the set values which change default settings when the AJ71C24
READY signal (Xn7) is turned ON in the set value's column.
The settings required f o r the dedicated p r o t o c o l and t h e no-
protocol/bidirectional mode at the start of the AJ71 C24 are indicated with
[ ] mark in the columns next to the address's column.
Switch settings
1) Station number setting switch
Enter set values (value indicated by the arrow) in the columns of
the tens digit and the ones digit of each station number.
2) Transmission specification switch settings
Circle ON or OFF according t o switch setting from SW11 t o SW24
in the ONlOFF column.
Transmission
speed setting
3) Mode switch settings
Enter the set value (value indicated by the arrow) i n the mode
setting switch column.
APP
-
34
Advertisement
Table of Contents
