For Macintosh Users - Yamaha DTXTREME IIs Installation Manual

For Macintosh Users

Contents of the CD-ROM
The CD-ROM includes two folders: "International" and "Japanese." Double-click on the "International" folder to open it and access the various
applications (with their installers) listed below.
■ "International" folder
Folder Name Application Name
OMS_
Open Music System (OMS) 2.3.8
USBdrv_ YAMAHA USB MIDI Driver
SOUNDS User voices and waveform samples
(*) Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer user support for them.
• OMS® and are trademarks of Opcode Systems, Inc.
Minimum System Requirements
USB MIDI Driver
Computer: Macintosh Computer with built-in USB port
OS: Mac OS 8.6 through 9.2.2
CPU: Power PC or faster
Memory: 64MB or more (128MB or more is recommended)
Free space in Hard Disk: 2MB or more
OMS: OMS 2.3.3 or later (included)
n Turn off virtual memory.
Contents
(*) Enables you to use several MIDI applications on the Mac OS.
Enables communication between the DTXTREME IIs and your computer
via a USB connection.
Subfolders in the SOUNDS folder contain user drum kits, waveform
samples, user voices and so on.
n Each file name extension indicates a specific file type
.DAT : Waveform data exclusively designed for DTXTREME IIs.
.OKT : User kit data
Software Installation
Open Music System (OMS)
OMS allows you to use several MIDI applications on the Mac OS at
the same time.
1.
Double-click on the "OMS_" folder (English version only).
"Install OMS 2.3.8" will be displayed.
2.
Double-click on the "Install OMS 2.3.8."
OMS Setup Dialog will be displayed.
3.
Execute the installation by following the directions appearing on
the screen.
After the installation, select <Restart>.
n After the installation is complete, you may possibly encounter an
After restarting the Macintosh, you will find the "Opcode"/"OMS
Applications" folder on your computer (Hard Disk as the
default).
4
error message warning that the installer did not close. In this
case, go to the "File" menu and select "Quit" to close the
installer. Then reboot the computer.