Table of Contents
Advertisement
5 4
Clear v ision
Replacing windshield wiper blades
Wiper blades in good condition help keep the
windshield clear.
Fig. 6 1 Unlatc hing wiper blades
Fig. 62 Removing wiper blades
Removing the wip er blade
.. Move the wipers to the service position
¢ page 53.
.. Fold the windshield w iper arm away from
the g lass .
.. On the upper end of the wiper arm at the
corrugation, squeeze the plastic retainer to-
gether on both sides in the direction of the
arrow ¢
fig. 61.
.. Rotate the wiper blade in the direction of
the arrow @ ¢
fig . 62
away from the wiper
arm .
.. Lift the w iper blade off in the direction of
the a rrow @ .
Inst alling the wiper blade
.. Place the rounded end of the wiper onto the
end of the wiper arm in the opposite direc-
t ion to the arrow @ ¢
fig. 62 .
.. Squeeze the corrugation on the wiper until
you hear it click in t he wipe r arm .
.. Fold the wiper arm back onto t he wind-
shield.
.. Switch the ignition on and move the wipe r
lever down briefly ¢
page 51, fig . 60 .
The
wiper w ill move back to the park position.
_&
WARNING
-
-
For your safety, you shou ld rep lace the
wiper blades once or twice a year. See your
authorized Audi dealer for replacement
blades.
(D
Note
- The wiper blades may only be changed
¢
page 53
in the service posit ion! Othe r-
wise, you risk damag ing the pa int on the
front lid or the windshield wipe r motor.
- To help prevent damage to the wiper sys-
tem, always loosen blades wh ich are fro-
zen to the windshi eld before operating
wipers.
- To help prevent damage to wiper blades,
do not use gaso line, kerosene, paint
t hinne r, or ot her solven ts on or near t he
wiper blades.
- To help prevent damage to the wiper
arms or other components, do not at-
t empt to move t he wipers by hand .
(D
Tips
- Commercial hot waxes applied by a uto-
matic car washes affec t the cleanabili ty
of the g lass surface .
- The front wiper blades are different
lengths; t he b lade on t he drive r's side is
longer .
Advertisement
Table of Contents
