Operation and Maintenance Instructions
Water supply mode / Water hardness
Setting maintenance parameters
Rinsing
The parameters for rinsing are set as follows:
Parameter
Pre-rinsing
Brew unit auto rinsing
Milk frother auto rinsing
190033
Mains water connection and barrelled
water (tank) available.
Select the appropriate water supply mode.
The standard setting is supply from the
water tank.
Water hardness
This is where you set the degree of water
hardness for the appliance.
Standard setting: 15° dH.
Setting values
30 minutes 1–4 hours
OFF 5–20 min.
OFF 5–20 min.
Remarks
Default setting: 30 min.
Default setting: OFF
Default setting: 20 min.
41 / 66
EN