Table Of Functions - Yamaha DDP-1 Owner's Manual

The following 15 functions on this unit allows you to change several adjustments and mode settings for enhancing the performance
of your audio system including this unit. For adjustment or mode setting change on each menu function, refer to page 10–17.
MODE MENU (Function)
(Category)
A 1. CENTER DELAY
2. SURROUND DELAY
3. DYNAMIC RANGE
4. HIGH LEVEL CUT SCALE
5. LOW LEVEL BOOST SCALE
B 1. TEST: OFF/ON
2. LEFT SURROUND LEVEL
3. RIGHT SURROUND LEVEL
4. LFE MIX LEVEL
5. OUTPUT TRIM
C 1. INPUT
2. CENTER SPEAKER
3. REAR SPEAKERS
4. MAIN SPEAKERS
5. LFE/BASS OUT
Note
: Items A4 and A5 are adjustable only when item A3 is set to "STANDARD".
*
Memory back up
Parameter changes you made the last time will remain memorized even if the power of this unit is switched off or the power cord
is disconnected. However, if the power is not supplied for more than about two weeks, all parameters will be automatically
changed back to the original settings.

TABLE OF FUNCTIONS

PARAMETER
(Control range/Choices)
0 ms to 5 ms
0 ms to 15 ms
MAX/STANDARD
*
0.0 to 1.0
*
0.0 to 1.0
LEFT/CENTER/RIGHT/
RIGHT SURROUND/
LEFT SURROUND
–6 dB to +6 dB
–6 dB to +6 dB
MUTE, –20 dB to 0 dB
–9 dB to 0 dB
RF/OPTICAL/COAXIAL
SMALL/LARGE/PHANTOM
SMALL/LARGE
SMALL/LARGE
MAIN/SUBWOOFER
Preset value Step of
(Position) change
0 ms 1 ms
5 ms 1 ms
MAX –
1.0 0.2
1.0 0.2
OFF –
0 dB 1 dB
0 dB 1 dB
0 dB 1 dB
0 dB 0.5 dB
RF –
SMALL –
SMALL –
LARGE –
MAIN –
9