Connections - Yamaha DDP-1 Owner's Manual

•
Before attempting to make any connections to or from this
unit, be sure to first switch OFF the power to this unit and to
any other components to which connections are being made.
AC-3 RF OUT
Audio cord
(not included)
(U.S.A. model)
AC–3 RF
Refer to "Note 2"
below.
Amplifier or receiver (RX-V2090 etc.)
equipped with 5-ch discrete AC-3 terminals
Note 1) If this unit is connected to the RX-V2090, no
connection is needed to this terminal. By the output
mode selections on function C2 to C5, low frequency
signals including signals from the LFE channel can
be output from the main L and R speakers. (See
page 10 for details.)
If the amplifier has a discrete subwoofer input
terminal, connect it with this unit's SUBWOOFER
OUTPUT terminal.
6

CONNECTIONS

AC-3 laserdisc player or another AC-3 unit
INPUT
AC–3 DIGITAL
OPTICAL COAXIAL
Audio cords
(included)
•
When making connections between this unit and other
components, be sure all connections are made correctly, L
(left) to L, R (right) to R. Also, refer to the owner's manual for
each component to be connected to this unit.
Refer to the next page.
OUTPUT
MAIN CENTER SURROUND
SUBWOOFER
Refer to "Note 1"
below.
LD/TV
MAIN
5CH
LD/TV
DISCRT
CENTER
INPUT
LD/TV
SURROUND
Note 2) Do not connect a normal audio output terminal of a
laserdisc player etc. to this unit's AC-3 RF terminal.
AC OUTLET
UNSWITCHED
I20V 60Hz
I.6A MAX.
200W MAX.
To AC outlet
Audio cords
(included)