Table of Contents
Advertisement
en Time-setting options
Press "Information".
1.
a The information will be displayed for a few seconds.
Press
to close the information.
2.
8.9 Keeping warm over an extended period
You can use your appliance to keep meals warm for up
to 24 hours without changing the behaviour of the ap-
pliance. Use the time functions and change the basic
settings.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
ensure that the behaviour of the appliance is not
changed during operation, only open the appliance
door once the set time has elapsed.
Change the basic settings.
1.
→ "Basic settings", Page 15
Change the "Lighting" basic setting to "Always
‒
off".
Change the "Standby screen" basic setting to
‒
"On".
Change the "Signal tone" basic setting to "Very
‒
short duration".
a This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door. The
clock display does not change. The duration of the
signal tone is reduced at the end of the operation.
Time-setting options
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
Time-setting
Use
option
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. The timer does not affect the
appliance.
Cooking
Once the set duration has elapsed,
time
the appliance stops heating automat-
ically.
Ready at
Along with the duration, you can set
the time at which you want the oper-
ation to end. The appliance starts up
automatically so that the operation
finishes at the required time.
9.1 Timer
You can set the timer regardless of whether the appli-
ance is on or off.
Setting the timer
Press .
1.
Press Hours, Minutes or Seconds.
2.
3.
Use or to select the timer duration.
Press to confirm the setting.
4.
lights up red. The timer counts down.
a
a Once the timer duration has elapsed, an audible sig-
nal sounds.
12
Set the required operating mode.
2.
→ "Heating functions", Page 8
Set the required cooking time depending on the op-
3.
erating mode.
→ "Setting the cooking time", Page 12
→ "Time-setting options", Page 12
Use "End" to set the time at which the operation
4.
should end.
→ "Setting the "Ready at" time for delayed starts",
Page 13
→ "Time-setting options", Page 12
Place the food in the cooking compartment before
5.
the appliance starts to heat.
Press
to start the operation.
6.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
When the operation has ended, remove the food
7.
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note: If required, change the different basic settings
again.
Press any button to end the audible signal.
5.
Changing the timer
Press .
1.
Press .
2.
Press Hours, Minutes or Seconds.
3.
Use or to change the timer duration.
4.
Press to confirm the setting.
5.
Cancelling the timer
1.
Press .
Press
to reset the timer duration.
2.
Press
to close the timer.
3.
9.2 Cooking time
Once the set duration has elapsed, the appliance stops
heating automatically. You can only use the cooking
time in conjunction with a type of heating.
Setting the cooking time
Set a type of heating and a temperature.
1.
Press "Cooking time".
2.
Press Hours or Minutes.
3.
4.
Use or to select the cooking time.
Press
to confirm the setting.
5.
Press
to start operation with a cooking time.
6.
a The cooking time appears on the display. The cook-
ing time counts down.
a When the time has elapsed, a signal sounds.
Press any button to end the audible signal.
7.
Advertisement
Table of Contents
