Table of Contents
Advertisement
en Time-setting options
When the food is ready, use
9.
ance off.
8.5 Changing the temperature
You can also change the temperature or level once you
have started the appliance.
Press "Temperature".
1.
Use or to change the temperature.
2.
Press
to confirm the setting.
3.
a The temperature is changed.
8.6 Changing the type of heating
If you switch to a different type of heating, the appli-
ance will reset all the settings.
Press
to pause operation.
1.
Press
to switch to the types of heating.
2.
Scroll through the types of heating using or .
3.
Press the type of heating that you want to use.
4.
Adjust the temperature or level, if required.
5.
Press
to start the operation.
6.
8.7 Pausing operation
Press
.
1.
Press
again to resume operation.
2.
8.8 Displaying information
Note: In most cases, you can call up information about
the function that you have just started.
1.
Press "Information".
a The information will be displayed for a few seconds.
Press
to close the information.
2.
8.9 Keeping warm over an extended period
You can use your appliance to keep meals warm for up
to 24 hours without changing the behaviour of the ap-
pliance. Use the time functions and change the basic
settings.
Time-setting options
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
Time-setting
Use
option
Timer
You can set the timer to run inde-
pendently of the appliance during op-
eration. The timer does not affect the
appliance.
12
to switch the appli-
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
ensure that the behaviour of the appliance is not
changed during operation, only open the appliance
door once the set time has elapsed.
Change the basic settings.
1.
→ "Basic settings", Page 16
Change the "Lighting" basic setting to "Always
‒
off".
Change the "Standby screen" basic setting to
‒
"On".
Change the "Signal tone" basic setting to "Very
‒
short duration".
a This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door. The
clock display does not change. The duration of the
signal tone is reduced at the end of the operation.
Set the required operating mode.
2.
→ "Heating functions", Page 8
Set the required cooking time depending on the op-
3.
erating mode.
→ "Setting the cooking time", Page 13
→ "Time-setting options", Page 12
Use "End" to set the time at which the operation
4.
should end.
→ "Setting the "Ready at" time for delayed starts",
Page 13
→ "Time-setting options", Page 12
Place the food in the cooking compartment before
5.
the appliance starts to heat.
Press
to start the operation.
6.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
When the operation has ended, remove the food
7.
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note: If required, change the different basic settings
again.
Time-setting
Use
option
Cooking
Once the set duration has elapsed,
time
the appliance stops heating automat-
ically.
Ready at
Along with the duration, you can set
the time at which you want the oper-
ation to end. The appliance starts up
automatically so that the operation
finishes at the required time.
9.1 Timer
You can set the timer regardless of whether the appli-
ance is on or off.
Advertisement
Table of Contents
