Table of Contents
Advertisement
Screw L and H of the carburettor is sealed by Vittorazi Motors to ensure the safety of
operation. Incorrect setting of screw H can result in serious damage. If the opening of the
settings is lower than the table specifications, the mixture will be poor and there is the
possibility of breaks, such as seizure, overheating, piston melting, early wear of the
components. Wrong carburettor settings, or breakage of the L and H seal, lead to voiding of
the product warranty (see also the warranty paragraphs).
Cosmos 300 – User manual – V3
1
Throttle lever
2
Gasoline inlet
3
High speed screw
4
Low speed screw
5
Throttle adjustment
6
Choke lever
7
Pulse line inlet
33
Advertisement
Table of Contents
