Advertisement
1.9 Install the propeller and secure it with a pin and a safety ring.
Now your trike is ready for attaching the wing.
Refer to the ANT Owner/Service Manual for more information.
2. Starting the engine
2.1 Press and hold for 1 second the green button (aftermost button) on the battery unit (aftermost battery)
for to switch on the battery management system.
It takes
20-25 seconds until the
SDI (ADI)
display screen lights up.
After the system finish self check it will
make a single beep.
2.2 Set the
potentiometer
(throttle pedal) to idle position. Press and hold for 1.5 second the start button on
the ADI (SDI) unit. The system will be ready to operate and will play a continuous intermittent sound. After
you move the throttle the engine will start and the sound will disappear.
6
Advertisement
