Power On And Power Off; Data Output Mode - Generalscan GS P10 Quick Start Manual

POWER ON AND POWER OFF

Automatically power on when connected to the power supply,
automatically power off when disconnected from the power
supply.

DATA OUTPUT MODE

P10-XX-USB refer to the picture as below
USB Cable
PN:886783040001
1. USB HID Mode (Default)
Step1. Use USB Cable to connect.
Step2. Scan the barcode below, switch to USB HID mode.
Step3. Open a notebook application. When you scan a barcode
the data will appear at the cursor.
USB HID Mode (Default)