GS-TS-000001 Table of Contents Copyright....................................3 Service Information ................................3 Revision History ..................................3 Product model ..................................4 Illumination Brightness.................................4 Overview..................................4 Operation..................................5 Example..................................11 Aim Brightness..................................12 Overview..................................12 Operation (Continued)..............................12 Example (Continued)..............................13 Page 2 of 13...
GENERALSCAN reserves the right to make changes to any product to improve reliability, function, or design. GENERALSCAN does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
GS-TS-000001 Product model You can confirm the product model according to the position shown in the figure below. R3521 Illumination Brightness Overview This feature sets the brightness of the illumination by altering LED power. The default is 10, which is maximum LED brightness. For values from 1 to 10, LED brightness varies from lowest to highest level of brightness.
GS-TS-000001 Operation Step 1. Enable the Illumination Brightness. Step 2. Scan the Numeric Barcodes. Level 1:Scan the following Numeric Barcodes 0-1. Page 5 of 13...
Page 6
GS-TS-000001 Level 2:Scan the following Numeric Barcodes 0-2. Level 3:Scan the following Numeric Barcodes 0-3. Page 6 of 13...
Page 7
GS-TS-000001 Level 4:Scan the following Numeric Barcodes 0-4. Level 5:Scan the following Numeric Barcodes 0-5. Page 7 of 13...
Page 8
GS-TS-000001 Level 6:Scan the following Numeric Barcodes 0-6. Level 7:Scan the following Numeric Barcodes 0-7. Page 8 of 13...
Page 9
GS-TS-000001 Level 8:Scan the following Numeric Barcodes 0-8. Level 9:Scan the following Numeric Barcodes 0-9. Page 9 of 13...
Page 10
GS-TS-000001 *Level 10:Scan the following Numeric Barcodes 1-0. Page 10 of 13...
GS-TS-000001 Example To set the Illumination Brightness for level 5. Step 1. Enable the Illumination Brightness. Step 2. Scan the Numeric Barcodes. Level 5:Scan the following Numeric Barcodes 0-5. Page 11 of 13...
GS-TS-000001 Aim Brightness Overview This feature sets the brightness, or power of the aim pattern. There are three settings: low, medium, and high. The default is high. NOTES:The weaker the aim brightness, the lower the power consumption. When the aim brightness is set to low, you can hardly find the aiming light, which may affect your use.