Table of Contents
Advertisement
IDENTIFICATION OF CONTROLS
REAR PANEL
1
2
3
15
16
1 SERVICE
•
These USB port and tact switch are for servicing purposes only. Not
for consumer use.
2 RESET
•
Use this tact switch in forcing the factory reset of the unit. Refer to
item about FORCE FACTORY RESET under FACTORY RESET section.
3 HDMI eARC
•
Connect to TV that supports HDMI Control (CEC) and Audio Return
Channel (ARC) or Enhanced Audio Return Channel (eARC) functions.
HDMI CEC, ARC and eARC functions are possible if external devices
that also support these features are interconnected with M66 via
HDMI connection.
•
Use HDMI cable to connect HDMI ARC/eARC to corresponding
HDMI ARC/eARC port of TV. Use HDMI cable that has Ultra High
Speed HDMI Certification Label to enjoy support for larger
bandwidth and high bitrate format.
•
With ARC/eARC connection established, M66 will output audio
signal from TV.
IMPORTANT
•
Ensure that the audio setting/format of ARC/eARC-connected devices to
M66 is set to PCM only.
•
Only audio output signal from TV is supported by HDMI eARC port.
4 BLUETOOTH (BT) ANTENNA TERMINAL
•
Install supplied antenna to corresponding BT antenna terminal.
5 LAN/USB
LAN
•
LAN connection must be setup for wired connection to be
established. Set up a Wired Ethernet broadband router with
broadband internet connection. Your router or home network
should have a built-in DHCP server to consummate the connection.
•
Using a standard straight-through Ethernet cable (not supplied),
connect one end of the Ethernet cable to the LAN port of your
wired Ethernet broadband router and the other end to M66's LAN
port.
8
4
5
6
7
8
17
18
9
10
11
19
20
21
NOTES
•
NAD is not responsible for any malfunction of the M66 and/or the
internet connection due to communication errors or malfunctions
associated with your broadband internet connection or other connected
equipment. Contact your Internet Service Provider (ISP) for assistance or
the service bureau of your other equipment.
•
Contact your ISP for policies, charges, content restrictions, service
limitations, bandwidth, repair and other related issues pertinent to
internet connectivity.
USB
•
Connect to this USB port a USB drive formatted as FAT32, NTFS or
Linux ext4.
•
Upon detection of the connected USB drive, an onscreen prompt
appears in the BluOS App and also in the front panel display.
Yes: USB drive is shared with other players on the network from the
local Library. Select "Library" from the BluOS App to access the shared
USB drive files.
No: USB drive access is restricted only to M66. The connected USB drive
appears as a Local Source (USB) in the BluOS App. Access and playback
music stored in the connected USB drive by selecting "USB" from the
BluOS App.
6 WI-FI ANTENNA TERMINAL
•
Install supplied antenna to corresponding Wi-Fi antenna terminal.
7 OPTICAL 1-2/COAXIAL 1-2
•
Connect to corresponding optical and coaxial digital output of
sources such as CD players, streamers digital cable box, digital
tuners and other applicable components.
•
The sources will appear as "Optical 1", "Optical 2", "Coaxial 1" and
"Coaxial 2" in the navigation drawer of the BluOS App.
12
13
14
22
23
24
Advertisement
Table of Contents
