URBANGLIDE RIDE 100 CITY Original Manual page 19

•
Usage of the charger
Before using the product, it is necessary to charge it. A long charge may be required before first use. Please rely
on the light on the battery indicator. It is possible to charge your battery at any time to ensure constant power, it is
not necessary to wait until the battery is completely empty to charge it. Use only with PS84B546Y1500S power
supply unit. To recharge the battery, use only the detachable power supply unit supplied with the device.
Please do not use the charger of other brand, these may damage the battery of your product. It is important to
charge your battery at least once every 3 months, even if you are not using the product, to ensure a normal life
cycle. Avoid shocks and contact with water, these are factors not covered by the warranty that can damage the
battery. The charger provided is "intelligent", it is designed to stop at 100% of the charge and not damage the
battery. The charger must be in perfect condition each time you use it, check the wires, the condition of the tips
and connectors. If the product does not charge, the charger may be faulty, it is then necessary to change it. The
charger should only be used by an adult, it is important to unplug it from both sides when not charging. Do not
charge your scooter unattended.
The charging connector cover must be closed when the scooter is not being charged.
The external flexible cable of this transformer cannot be replaced; if the cable is damaged, the
transformer should be disposed of.
•
Battery
Please do not store the battery in extreme temperatures. Below 30°C and above 0°C. If you do not use your
product for 60-90 days, the battery may be less efficient than when it started. This loss of autonomy is due to
lack of use and is therefore not covered by the warranty.
At the end of its cycle, the battery must be disposed of separately from undifferentiated generic waste. Dispose
of the batteries in the containers provided for this purpose. Collecting and recycling batteries helps to protect the
environment and conserve material resources. This product contains a Li-ion battery, any fire must be
extinguished using a powder extinguisher (Class D fire)
(The battery is subject to wear).
This device contains a battery which may only be replaced by qualified personnel.
WARNING: To recharge the battery, use only the removable power supply unit supplied with the unit."
Charger part number (PS84B546Y1500S).
•
Maintenance
Please store your product in a dry and dust-free place, and avoid leaving it too long in a humid space or under
the sun. To clean your device, use a damp cloth and mild detergent. Do not use alcohol, gasoline, kerosene or
other harsh chemical solvents to clean your device, which will damage its appearance and structure.
Constantly check the condition of your product components, if any part is damaged, please replace it before
using the product. If a part is not in working order, you risk falling and injuring yourself.
•
Transport
If you wish to transport your product, as well as its battery, by plane or by other means of transport, please
contact the competent local authorities and the carrier beforehand in order to inform you of any prohibitions and
restrictions on transport. Lithium batteries are considered dangerous in many countries. Please ensure before a
trip that access and transport is authorised. International law prohibits the air transport of lithium batteries.
Scooter handling:
Always use both hands on the stem to carry and move the scooter safely, wear suitable footwear and
check that the locking system is securely locked
•
Use of the product
To turn on your product, press the Power button located on your handlebars. Move the scooter forward with
your foot to reach a speed of around 3 km/h, then press the acceleration trigger. The electric system will
start up automatically. To brake use the manual brakes located on the handlebars. You can also use the rear
mudguard, if your product is equipped with it. Before each use, please check that the wheels are free from
obstruction, that the brakes are working. In order to make certain basic adjustments, in particular the play of the
brake control, come and discover our tutorial videos available on our YouTube channel: URBANGLIDE
CHANNEL.
The use of this type of product over a long period can cause vibrations which can be unpleasant, take breaks
regularly. To warn other users of your presence, use the buzzer located on your handlebars, if your product is
equipped with them. Use the front LED to light your way in dark places. When you stop your product, use the
stand to stabilize it.
.
19