Disassembly Ii; (Optical Pick-Up Block Motor Operates); (Optical Pick-Up Block Motor Doesn't Operate) - Sony MDP-V10 Service Manual

DISASSEMBLY II

(OPTICAL PICK-UP BLOCK MOTOR OPERATES)

1 Remove the case.
2 Open the MB-97/VX-97 board.
3 Remove the chucking block assy and reinforcement stay ass'y.
5 Turning the power ON, the pick-up moves to the position where it
can be removed.
8 Open the claws on both side of
housing and remove flat cable.
4 Screen the sensor when the
power is in STANBY mode.
DISASSEMBLY III

(OPTICAL PICK-UP BLOCK MOTOR DOESN'T OPERATE)

(The pick-up block cannot be re-used by using this method)
1 Remove the case.
2 Open the MB-97/VX-97 board.
3 Remove the chucking block assy and reinforcement stay ass'y.
8 Open the claws on
both sides of housing
and remove flat cable.
Two claws
Housing
Two sesnsors
Worm gear
Housing
9 Optical pick-up block Midway gear
6 Pull out plug from wall socket.
7 Pull out optical pick-up block with hand
5 Remove a screw mounting sled motor.
6 Insert screwdriver to hole for screw removed step 4
and move a little sled motor in the arrow A direction.
Disengage worm gear and midway gear.
7 Pull out optical pick-up block from feed
base block assembly by moving it in the
arrow B direction with hand.
2-7
in the arrow direction.
4 Pull out plug from wall socket.