2-7. CONTROL GEAR AND LOADING MOTOR ASSEMBLY
5 Loading motor assembly
2-8. MOUNTING THE CONTROL GEAR
Note: Follow the assembly procedure in the numerical order given.
2 Slider (R) knob
(Put aside in the direction of arrrow.)
2 Control gear
Marking
2-4
3 Belt
4 Two screws (M3 x 2)
1 Screw (PTPWH3 x 20)
1 Tilt slider knob
(Put aside in the direction of arrrow.)
3 Control gear
Note on installation:
(1) Apply the grease on the cam groove of control gear.
(Grease: Molykote Grease EM-30LG Part No. J-6090-014-A)
(2) Setting that marking at the position shown as the figure.
4 Screw (PTPWH3 x 20)