For Macintosh Users - Yamaha Acoustic Installation Manual

For Macintosh Users

Software Installation
Open Music System (OMS) 2.3.8
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
OMS allows you to use several MIDI applications on the Mac OS at the same time.
If you already have OMS installed on your computer, reinstallation is
unnecessary.
1 Start the computer.
2 Insert the included CD-ROM into the CD-ROM drive. The system displays
the CD-ROM icon on the desktop.
3 From the CD-ROM → "International" folder → double-click the "OMS"
folder.
"Install OMS 2.3.8" will be displayed.
4 Double-click on "Install OMS 2.3.8."
OMS Setup Dialog will be displayed.
5 Execute the installation by following the on-screen directions.
After the installation, select "Restart."
n After the installation is complete, you may possibly encounter an
error message warning that the installer did not close. In this case, go
to the "File" menu and select "Quit" to close the installer. Then
reboot the computer.
After restarting the Macintosh, you will find the "Opcode"/"OMS Applications"
folder on your computer (Hard Disk, as the default).
6 From the CD-ROM → "International" folder → "OMS" folder → copy the
"OMS Setup for Yamaha" folder to the "OMS Applications" folder (drag-
and-drop it to the folder).
In the "OMS Setup for Yamaha" folder you will find the OMS setup file for
the MAGICSTOMP labeled "USB-MAGICSTOMP". Use this setup file to
setup OMS. (page9)
USB MIDI Driver
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To operate the MAGICSTOMP from your computer via USB, you'll need to
install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and forth
between sequence software and the MAGICSTOMP via a USB cable.
Computer
Sound Editor
for
MAGICSTOMP
OMS Driver
Also, after installing the USB-MIDI driver, you will need to set up the OMS
(page9).
1 Start the computer.
2 Insert the included CD-ROM into the CD-ROM drive. The system displays
the CD-ROM icon on the desktop.
3 From the CD-ROM → "International" folder → "USBdrv_" folder →
double-click the "Install USB MIDI Driver" icon.
4 The "Install Location" box displays the destination of the installation. If
you wish to change the destination disk or folder, use the [Switch Disk]
button and the pop-up menu to specify the desired destination.
n
As this box usually displays the start-up disk as the destination,
nothing needs to be changed.
5 Click the [Install] button. The system displays the following message: "This
installation requires your computer to restart after installing this software.
Click Continue to automatically quit all other running applications." Click
[Continue].
n
To cancel the installation, click [Cancel].
SOFTWARE for MAGICSTOMP
MAGICSTOMP
U99¤MAGICSTOMP
USB cable ó‡GAINfiMSTRáTONE
Installation Guide
7