• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.
Installing Compressor 260/260S See the Add-On Effects Installation Guide for more information on installing Compressor 260/260S. Using Compressor 260/260S As with other effects, you can recall and edit the Compressor 260/260S program on the console or in Studio Manager. The basic operation is as follows: Select one of the internal effects processors.
Part Names and Functions In the following section: Functions marked with Studio Manager Functions marked with are available on the console. Console [THRESHOLD]/[THRE. (1&2)] controls Adjust the Compressor’s threshold. The range is from –60.0 through 0.0 dB. [ATTACK]/[ATTACK (1&2)] controls Adjust the Compressor’s attack time.
[RATIO]/[RATIO (1&2)] controls Adjust the Compressor’s ratio. The range is from 1.0 through ∞. [KNEE] button/[KNEE (1&2) controls Adjust the Compressor’s knee. The options are Soft (LED turns off), Medium ( [LINK ON] button/[ST LINK] control Only Compressor 260 features this button and control. When you turn this parameter on, the LED lights up red, and CH1 and CH2 are linked as a stereo pair.
The console displays either the Effects input or output level. You can select the input level or output level to be displayed using the METER: [IN]/[OUT] buttons . Studio Manager Console U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2003 Yamaha Corporation 312IP-01A0...