American Standard Estate 2692004 Owner's Manual page 4

1
TUB INSTALLATION
Place the tub on a finished, level floor in the desired location.
Using a marker, trace the outline of the tub drain hole onto the floor.
NOTE: If using existing P-Trap location, then skip to Step 3.
2
Install the P-Trap in the marked drain location. P-Trap is installer provided.
3
Place the tub again in the desired location with the drain hole directly in line with the P-trap.
Using an erasable marker or pencil, trace the outline of the tub on the floor (see Fig. 1).
4
Using the adjustable feet on the underside of the tub, ensure that the tub is level.
Ensure that there is a gap between the tub base and the floor. Gap shall not exceed 3/16" (5mm).
(See Fig. 2)
3/16" MAX
(5mm)
FINISHED FLOOR
5
Install drain per instructions provided with Drain Kit 1582.000.YYY.
Drain Kit 1582.000.YYY purchased separately.
FIG. 1
FIG. 2