Download Print this page

American Standard Right Height Toilet Ravenna Specifications

American standard right height toilet specification sheet

Advertisement

Quick Links

RAVENNA™ RIGHT HEIGHT™ TOILET
2646.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl
• 16-1/2" Rim height for accessible applications
• Fully glazed 2" trapway
• AquaForce fl ushing technology
• Styled tank w/fi tted tank cover
• Chrome trip lever
• Speed Connect™ tank/bowl coupling system
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory fl ush tested
• Design coordinated to Ravenna
pedestal lavatory
3417.016 Bowl
4096.016 Tank
Alternate Tank:
4096.516 with Aquaguard tank liner
Nominal Dimensions:
756 x 476 x 787mm
(29-3/4" x 18-3/4" x 31")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specifi ed:
❏ Color:
❏ Seat: American Standard #5324.019 "Rise and
Shine" solid plastic, closed front, elongated seat
with cover.
❏ Seat: American Standard #5311.012 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2006 American Standard Inc.
RIGHT HEIGHT™ TOILET
FINISHED WALL
756mm
(29-3/4)
19mm ± 6mm
(3/4 ± 1/4)
222mm
(8-3/4)
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
178mm
305mm
(7)
(12)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
K62
RAVENNA™
VITREOUS CHINA
476mm
(18-3/4)
C/L
SUPPLY
AS
REQ'D
419mm
(16-1/2)
381mm
*
222mm
(15)
(8-3/4)
152mm
(6)
FINISHED
FLOOR
241mm
(9-1/2)
Revised 5/05
787mm
(31)

Advertisement

loading

This manual is also suitable for:

Ravenna right height 2646.016Ravenna right height 3417.016Ravenna right height 4096.016