Table of Contents
Advertisement
Installation and Operating Instructions
6.4.2 Advanced Settings
WARNING
Improper or dangerous operation!
•
The following settings are explicitly for a qualified installer or service
agency.
Press the settings button for more than 3 seconds to enter advanced settings.
Figure 15
Item
Description
F01
Unit conversion for temperature display
F02
Maintenance reminder
F03
Time for maintenance reminder
F04
Reset maintenance time
F05
Clear error code
F06
Not applicable to this product
F07
Legionella protection
F08
Electric heating element auto activation temperature
F09
Legionella protection cycle time
F10
Not applicable to this product
F11
Set vacation mode temperature
F12
Not applicable to this product
F13
Not applicable to this product
Time until electric heating element activates when heat pump is not able to
F14
increase tank tempeature
F15
Not applicable to this product
F16
Not applicable to this product
F17
Legionella protection temperature
F18
Maximum temperature setpoint
Advanced Settings
Table 18
22 |
Options
0 – Celsius
1 – Fahrenheit (default)
0 – No maintenance reminder
1 – Maintenance reminder (default)
Only available if F02 = 1
Select 30 – 365 days (default: 365)
Select 1 and confirm to reset day count of maintenance reminder
Select 1 and confirm to clear error code
0 – off (default)
1 – on
Select in Celsius (default: 5)
"Only available if F07 = 1
Select 0 - 23 hours"
Select in Celsius
Step size 10 minutes
Select in Celsius
Select in Celsius
Bosch GreenTronic 7000 T Hybrid Electric Water Heater - BTC 755003301 A (03.2024)
Advertisement
Table of Contents
