Table of Contents
Advertisement
5.3.3 Condensate Drain
The water heater will produce condensate during operation. Install supplied drain
pipe to properly drain the condensate. Neutralizer is not required.
Condensate
Drain
Condensate drain
Figure 4
5.3.4 Filling the Water Heater
After piping and hook-ups are completed:
1.
Open all hot water fixtures.
2.
Open shut off valve on cold water inlet and hot water outlet to fill tank.
3.
As each hot water outlet delivers water free from air, it can be shut off.
4.
Check the system for leaks.
Bosch GreenTronic 7000 T Hybrid Electric Water Heater - BTC 755003301 A (03.2024)
5.4 Electrical
5.4.1 Electrical Connections
WARNING
Fire, shock hazard, property damage!
•
Do not use this water heater with any electrical supply voltage other
than specified.Check the data plate on the front of the water heater for
the correct voltage rating. Failure to use the correct voltage can result in
death, serious bodily injury or property damage. If you have any questions
or doubts consult your electrical utility company before installing this
water heater.
WARNING
Hazardous voltage!
•
Qualified electrician required.
•
Before installing electrical wiring, make sure the electrical supply to the
water heater is turned "OFF".
WARNING
Improper operation!
•
DO NOT ALTER any of the internal wiring.
NOTICE
Product damage!
•
Before energizing the water heater, make certain that the water heater is
completely full of water and that the cold water inlet valve is open. If the
heating elements are not completely immersed in water at all times, they
will be damaged if energized for even a short time.
Installation and Operating Instructions
| 13
Advertisement
Table of Contents
