Foreword Congratulations on purchasing the StairTrainer. This is an original user manual for the StairTrainer. Hereinafter we also use the term training aid for the StairTrainer. It is important to read this manual before using the training aid. Any incorrect use may cause unintended hazards.
The following was used in the assessment: EN ISO 12100- 1: 2003 Basic terminology and methodology EN ISO 12100- 2: 2003 Technical principles EN 1050:1997 Principles for risk assessment Søren Elisiussen Position Name Liftup A/S, Hagensvej 21, DK-9530 Støvring, Denmark Sted 3 January 2024 Date Signature...
Terms of use The StairTrainer is exclusively for the use of persons in need of rehabilitation and/or maintenance training. It is important to read this manual before using the training aid. Any incorrect use may cause unintended hazards. Always keep the user manual available near the StairTrainer.
Safety instructions Handling and repair Do not attempt to install or repair the StairTrainer yourself. This MUST be done by an authorized service technician. The training aid must never be exposed to strong shocks/bumps when moved around, as this may have an impact on the functionality.
Start-up The StairTrainer must always be connected to a 100-240 V socket and be switched on. Normally, the StairTrainer is always in “standby mode”, i.e. it is ready for use as soon as one of the operation keys is pressed.
Page 10
Transfer/relocation The StairTrainer can be moved around by one person. The device is equipped with 3 swivel wheels at the back of the stairs, and 2 fixed wheels, situated on each side frame, on which it can roll. • Run the StairTrainer all the way down until it rests on the wheels.
Operation In normal operating conditions, the StairTrainer should always be connected to a 100-240 V socket. 10.1 Calibration after power failure/disconnection If the power supply has been interrupted, or if the system registers any other irregularity, the training aid must be calibrated Run the training aid down until it rests on the lower level (10 cm).
For further information regarding spare parts and services, please contact our distributors: https://www.liftup.dk/us/distributors/ Part no. Description 100255 Mounting kit for steps 100247 Spiral cable for StairTrainer 100242 Lifting column for ELx00/1 and StairTrainer 100064 Wheel for stair frame 100067 Swivel wheel 100241 Control panel for 100.243 100243 Control unit 100580 Power cable –...
Warranty The warranty applies in relation to the rules for the warranty prevailing at any time. Liftup offers a full 2-year warranty on spare parts, provided the product has been registered with Liftup (http://lpr.liftup.dk/): Find out more about this in our sales and delivery terms, which can be found on our website: https://www.liftup.dk/us/about-us/general-conditions/...
Page 18
– to being smart and pleasurable design elements for everyone to enjoy. Liftup North America, Inc. | 5626 56th Commerce Park Blvd | Tampa, FL 33610 | T: +1 844 543 8878 | M: info@liftup.us...
Need help?
Do you have a question about the STAIRTRAINER and is the answer not in the manual?
Questions and answers