Related Manuals for liftup HDN
Summary of Contents for liftup HDN
- Page 1 User manual USER MANUAL – HDN – EN VERSION 03.02 Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | T: +45 96 86 30 20 | M: support@liftup.dk | www.liftup.dk...
-
Page 2: Table Of Contents
10.2 Operation of the HDN lift from UPPER level ................13 10.3 Operation of the HDN lift from LOWER level ...............13 10.4 Operating the HDN lift when the user is on the lift ..............14 10.5 Emergency stop ..........................14 10.6 Key switch ............................14 11. - Page 3 16. Spare parts and accessories ........................26 17. Disassembly ............................26 18. Disposal ..............................26 19. Warranty ..............................26 June 2023 Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
-
Page 4: Foreword
The HDN lift is operated easily by means of operating panels mounted on the wall, a call station column positioned on the lift and/or by means of an elegant remote control (optional equipment). -
Page 5: Eu Declaration Of Conformity
Søren Elisiussen Position Name Liftup A/S, Hagensvej 21, DK-9530 Støvring, Denmark Location 1 February 2021 Date Signature Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... -
Page 6: Factory Acceptance Test (Fat)
USER MANUAL – HDN – EN VERSION 03.02 3. Factory Acceptance Test (FAT) Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... -
Page 7: Terms Of Use
USER MANUAL – HDN – EN VERSION 03.02 4. Terms of use The HDN lift is exclusively for the use of wheelchair users and persons with impaired mobility. The maximum load is 400 kg, evenly distributed on the lift (max. 2 persons). The maximum load can also be seen on the CE mark fitted on the inside of the plates. -
Page 8: Technical Specifications
2 mins /18 min. Ambient temperature: -25 °C to +65 °C Full capacity: +5 °C to +40 °C Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... -
Page 9: Safety Instructions
6. Safety instructions 6.1 Installation and maintenance Do not attempt to install or repair your HDN lift yourself. This MUST be done by an authorised service technician. Do NOT remove safety plates or top plate, as this could lead to the lift causing personal injury. -
Page 10: Anti-Crushing
6.7 Avoid personal injury In order to avoid personal injury, it is NOT permitted to use the HDN lift when anyone or anything is in danger of being injured or damaged as a result of crushing, cutting, falling, tripping etc. -
Page 11: Automatic Door
Never use a high-pressure washer or water hose to wash down the lift as this could cause defects in the product. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... -
Page 12: Function Description
9. Start-up The HDN lift must always be connected to a 230 V socket and be switched on. Normally, the lift is always in “standby mode”, i.e., it is ready for use as soon as one of the operation keys is pressed. -
Page 13: Operation
10. Operation 10.1 Everyday use The HDN lift is operated by means of the two operating panels, above and below the lift respectively, a call station column positioned on or beside the lift and/or the remote control (optional equipment). The remote control replaces or supplements the fixed button panels. -
Page 14: Operating The Hdn Lift When The User Is On The Lift
USER MANUAL – HDN – EN VERSION 03.02 10.4 Operating the HDN lift when the user is on the lift The HDN lift operates as a wheelchair lift by means of the arrow buttons (/) or the remote control (optional equipment). -
Page 15: Maintenance
Do not dispose of the battery together with unsorted household waste. When disposing of batteries, local provisions and regulations must be complied with. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |... - Page 16 If the remote control or receiver has been without power for a long period of time, it may be necessary to calibrate the system (pair the two units), see section 13.2. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
-
Page 17: Pairing Transmitter And Receiver
Pull the printed circuit out of the top cover carefully. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... - Page 18 1. Press Connect (1) on the receiver for more than 10 seconds. 2. Once the LED starts to flash rapidly, the receiver has been reset. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |...
-
Page 19: Remote Control 2.4 Ghz
5. Test the system to ensure that the pairing has been performed correctly; if not, repeat 1-3 above. Repeat from step 2 above if several remote controls are to be paired. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |... - Page 20 2. Once the control light starts to flash rapidly 10 times, the receiver has been reset. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
-
Page 21: Installation And Handover
The installation and handover check list below, which lists the lift's operating and safety functions, must be gone over with the user/owner of the lift before installation is concluded. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |... -
Page 22: Inspection, Checks And Service Inspections
IMPORTANT! The number of statutory inspections and checks depend on the legislation in the country in question. A service inspection carried out by a Liftup service technician covers the requirements for the statutory check. 15.2 Regular service inspections As a manufacturer, we lay down requirements for regular service inspections of the lift to be carried out, see the interval stated below. -
Page 23: Service Report For Use In Service Inspections
USER MANUAL – HDN – EN VERSION 03.02 15.3 Service report for use in service inspections Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... -
Page 24: Service Logbook
USER MANUAL – HDN – EN VERSION 03.02 15.4 Service logbook The form (like the example below) must be completed after each inspection. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964... -
Page 25: Online Service Log (Only Certain Countries)
The fields are filled in and the service technician/installer/regulating authority signs this off electronically in the log after each visit. Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 |... -
Page 26: Spare Parts And Accessories
Contact your agent for assistance with disassembly. Be aware that a risk of crushing may result from the HDN lift being disengaged from the building and the scissor unit being lifted manually. - Page 27 Environment Authority’s Order no. 1109, § 14. Enjoy your new HDN lift! Kind regards Liftup A/S Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
- Page 28 USER MANUAL – HDN – EN VERSION 03.02 Liftup A/S | Hagensvej 21 | DK-9530 Støvring | Denmark | +45 96 86 30 20 | support@liftup.dk | www.liftup.dk | CVR DK-1015 3964...
Need help?
Do you have a question about the HDN and is the answer not in the manual?
Questions and answers