Pioneer CDJ-500G Service Manual page 6

CDJ-500G, CDJ-500
Top Panel
Q PIONEER
CDJ-500G
come, e
ACT OFSC PLAYER
®@LOe
) POWER STANDBY/ON switch
This is the switch for electric power.
ON: When set to the ON position, the power is
supplied and the player becomes operational.
STANDBY: When set to the STANDBY position, the
main power flow is cut and the player is no longer
fully operational. A minute flow of the power feeds
the player to maintain operation readiness.
(2) TRACK SEARCH buttons ( <<, > )
Each time the button is pressed, playback advances
or reverses to the beginning of the track.
(3) SEARCH buttons ( <<, p> )
While the button is kept pressed, playback rapidly
advances or reverses toward the end or beginning of
the disc.
(4) LOOP button
After the cue point is memorized, pressing this button
in playback mode repeats the section between the
cue point and the point where the LOOP button was
pressed without intervals of sound.
1-6
(5) CUE button/indicator
Three functions are available.
[Cue Point Memory]
When this button is pressed in pause mode, the player
memorizes that point. You can start immediately
playback from that point (Playback standby mode).
The player enters playback standby mode.
When the new cue point is memorized, the last stored
cue point is cleared.
{Back Cue]
When this button is pressed in playback mode, the
sound is muted and playback is paused at the cue
point.
[Cue Point Monitor]
When this button is pressed after the cue point Is
memorized, the sound can be heard for about 0.7
seconds maximum from the cue point.
When the CUE point is memorized, the CUE indicator
lights up. When the player enters pause mode to
write the new cue point, the CUE indicator blinks.