Related Manuals for Ride1up CF RACER1
Summary of Contents for Ride1up CF RACER1
- Page 1 Ebike Owner’s Manual For the most up to date documents, bike models, additional information, instructional videos, and more, visit us at Ride1UP.com...
- Page 2 Ride1Up CF Racer1 Owner’s Manual Thank you for purchasing a Ride1Up CF RACER1 ebike! Please fill out the information below. This is for your records only. Your serial number is the number stamped on the bottom of the downtube of the ebike.
-
Page 3: Table Of Contents
Model: CF Racer1 Table of Contents 1. SAFETY NOTES ............................... 5 1.1 PERSONAL SAFETY: ............................. 5 1.2 EBIKE SAFETY: ..............................6 1.3 ELECTRICAL SAFETY: ............................6 1.4 BRAKE SAFETY: ..............................6 1.5 MAINTENANCE: ..............................7 1.6 ADDITIONAL WARNINGS: ............................ 7 1.6 ADDITIONAL WARNINGS (CONTINUED): ...................... - Page 4 WARNING: Basic safety precautions should always be observed when using an electrical appliance to reduce the risk of fire, electrical shock, or serious injury. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 5: Safety Notes
Have maintenance/repairs done by a qualified bicycle mechanic. Never use/ride any Ride1Up bike product in ways precluded by the manufacturer and the laws of your state and local municipality. It is your responsibility to comply the laws in which you are operating the ebike. Laws vary depending on location in which you operate the bike. -
Page 6: Ebike Safety
1.3 Electrical Safety: Only use the charger supplied by Ride1Up and never tamper or modify the charger in any way. Do not leave the ebike or battery plugged into a wall outlet unattended. Unplug the battery before leaving the bike alone. -
Page 7: Maintenance
Do not ride your bike at night without properly functioning front head lights and rear taillights. Wear reflective and light-colored clothing. Failure to do so may result in serious injury and/or death. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 8: Additional Warnings (Continued)
Accidents increase in wet weather conditions. Keep your ebike and packaging materials such as plastics, foam, and cardboard away from children. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 9: Notable Bike Parts
Never operate a bike while under the influence of alcohol, drugs, or any substance or condition that could impair motor functions, judgement, or the ability to safely operate a bike. 1.7 Notable Bike Parts: For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 10: What's In The Box
Included in your parts box is a torque wrench set, hex wrench set, pedals, reflectors, crank arm tool (not needed for assembly), seatpost grommet, anti-slip for seatpost, maintenance grease for pedals, charging box and cord, beanie and ambassador pamphlet For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 11: Installation Steps: Assembling Your Bike
We recommend getting help lifting the bike out of the box. Carefully clip the zip ties to remove the front wheel and remove all protective packaging to begin § assembly For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 12: Front Wheel Assembly
Step 1: Using the torque wrench and 6mm torque bit, remove the thru-axle and platform stand. § Gently rest the dropouts on a smooth, level surface. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... - Page 13 Step 2: Remove the brake caliper spacer before installing the front wheel. § Step 3: Insert the front wheel and gently guide the rotor into the front brake caliper. § For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
- Page 14 § Step 5: Using the torque wrench and 6mm torque bit, tighten the thru-axle in the dropout threads to § 12nm. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com...
-
Page 15: Saddle/Seat Post Assembly
Lightly apply anti-slip to the post, then insert the seatpost into the seat tube. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 16: Pedal Installation
Step 1: With the included maintenance grease, lubricate the right pedal threads. Using your torque • wrench and 6mm torque bit, gently thread and tighten the right pedal clockwise to 10nm of torque. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 17: Detailed Torque Settings
6mm torque bit, gently thread and tighten the left pedal counterclockwise to 10nm of torque. 3.4 Detailed Torque Settings: For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 18: Adjust Derailleur And Shifter
Adjusting your derailleur properly will be done best by a mechanic, however it can be accomplished by following a helpful video. Please check our support pages at www.Ride1UP.com for the latest tips and video on how to do this properly. -
Page 19: Ebike Basics & Care
5. Ebike Basics & Care 5.1 Ebike Basics: Your CF Racer1 ebike will arrive with an LCD 3-button display installed. The power button on the top side of the display turns on and off the bike. Simply long press the button. -
Page 20: Battery Basics & Care
(under adjustments) to remove any additional clicking or grinding noises. If you cannot fix the derailleur hanger, new ones can be found online. Ride1UP will cover the cost to straighten your derailleur hanger or replace if necessary if it arrived bent. -
Page 21: Troubleshooting Problems
(6.1.a) Display Settings: Perhaps a setting was accidentally changed. Try resetting the display by conducting a factory reset. Review the display manual or display support page on www.Ride1UP.com to reset the display. Steps to complete this procedure are listed on the last page of this owner’s manual. -
Page 22: Charging The Battery
If you ever see a spark while charging your battery. Please inspect the charging port of the battery and the tip of the charger. Please fill the contact form at https://ride1up.com/contact/ and share pictures. Follow the steps when charging battery: Step 1. -
Page 23: Battery Basics & Care
40-80%. Recommended storage temperatures are 50°-77°F and will provide the best performance out of the battery. Storage should be done in a dry area. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 24: Dm 02-Rm05 Lcd Display Instructions
To change the assist level, press the (+) or (-) buttons until desired level is displayed in the bottom center. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 25: Speed & Mileage Mode Switch
NOTE: ◆ THE DISPLAY MAY VARY BASED ON GENERATION. PLEASE REFER TO OUR ONLINE USER MANUAL BASE FOR UPDATED OR PREVIOUS MODELS. For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 26: Error Code Troubleshooting
Compare the code with this list below and how to resolve: 9.1 Error Codes/Source of the Error: For the most up to date documents, bike models, additional information, instructional videos, And more visit us at Ride1UP.com... -
Page 27: Warranty Information
After the first 30-days, Ride1UP will ship replacement parts of defective items within one year at no charge. The owner will be responsible for labor. Warranty parts will be shipped within the U.S. only at our cost. It will be necessary to fill out our contact form with a photo and/or video as requested at https://ride1up.com/contact/...
Need help?
Do you have a question about the CF RACER1 and is the answer not in the manual?
Questions and answers