Stihl RT 4082 Instruction Manual page 95

Push the mowing deck (1) under the
machine from the right-hand side with the
rollers facing forward.
Position the V-belt (2) over the linkage of
the mowing deck mounting (8).
Attaching the mowing deck at the front
● Select the lowest cutting level.
0478 193 9905 C - EN
Swivel front mowing deck mounting (7)
downwards and attach to mowing
deck (1).
Push mowing deck (1) to the rear,
attaching mowing deck mounting (7) to the
mowing deck.
Attaching the mowing deck at the rear
Note
Before attaching, check that the
mowing deck is correctly attached
at the front mowing deck mounting.
● Raise mowing deck (1) with one hand
and hold. The bores of the mounting on
the mowing deck must be aligned with
those of the mowing deck mounting on
the machine.
Note
To facilitate installation, note and
carefully observe the specified
sequence.
Step 1:
Push the retaining pin (4) through the
bores of the mounting on the mowing deck
(9) and those of the mowing deck
mounting (8) to the stop.
Step 2:
Insert cotter pin (3) through the bore in the
retaining pin (4).
Step 3:
Push the retaining pin (4) through the
bores of the mounting on the mowing deck
(9) and those of the mowing deck
mounting (8) to the stop.
93