Teradek Bolt 6 Series User Manual
  1. Manuals
  2. Brands
  3. Teradek Manuals
  4. Extender
  5. BOLT 6
  6. User manual

Teradek Bolt 6 Series User Manual

Wireless video transmission system
Hide thumbs Also See for Bolt 6 Series:
Table of Contents

Advertisement

Quick Links

B
6
OLT
© 2023 Teradek, LLC. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bolt 6 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Teradek Bolt 6 Series

Summary of Contents for Teradek Bolt 6 Series

  • Page 1 © 2023 Teradek, LLC. All rights reserved.

  • Page 2: Table Of Contents

    Teradek User Manual Table of Contents Quick Start Guides Bolt 6 XT Quick Start Guide ........................4 Bolt 6 LT Quick Start Guide ......................... 18 Bolt 6 LT-HDMI Quick Start Guide ....................... 31 Bolt 6 Monitor Module Quick Start Guide ..................42 Bolt 6 LT TX (Japan) Quick Start Guide .....................
  • Page 3 Teradek User Manual Device Placement ..........................106 Antenna Orientation .......................... 108 Additional Information Regulatory Information ........................109 Bolt 6 U-NII-5 (6GHz) support by region ..................117 Frequencies by Region ........................119 Technical Specifications Bolt 6 XT System ..........................119 Bolt 6 LT System ..........................123 Bolt 6 LT-HDMI System ........................

  • Page 4: Bolt 6 Xt Quick Start Guide

    The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.
  • Page 5 Teradek User Manual Table of Contents...
  • Page 6 Teradek User Manual WHAT'S INCLUDED PHYSICAL PROPERTIES POWER AND CONNECT PAIRING POWER CABLES MOUNTING TX/RX CONFIGURATION MENUS Wireless Settings ◦ Video Settings ◦ ◦ Tools ◦ Advanced/System Settings ◦ Additional Information BOLT APP OTHER RESOURCES What's Included • Bolt 6 XT Transmitter and Receiver •...
  • Page 7 Teradek User Manual Physical Properties Power and Connect 1. Connect your power source to the transmitter and receiver using the included A/C adapter. If both devices are equipped with battery plate accessories, attach a compatible battery (Gold or V mount).
  • Page 8 Teradek User Manual 1. Using the Menu Joystick, navigate to the Pair menu on both the transmitter and the receiver front panel. 2. Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within range and automatically pair to the receiver.
  • Page 9 Teradek User Manual Power Cables 2-Pin Power Connector Bolt devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector. * Pin 1 is closest to the red dot on the connector. Input Voltage: 6-28V DC...
  • Page 10 Teradek User Manual plug in the power cable first, THEN connect the video cable from the camera before powering on the TX unit. Mounting WITHOUT DUAL MOUNT Bolt 6 XT devices have a 1/4”-20 threaded hole (additional 3/8”-16 threaded hole on the receiver) and two M3 threaded holes on the bottom for mounting the included light stand adapter or any other mounting accessory.
  • Page 11 Teradek User Manual TX/RX Configuration Menus Wireless Settings Switch TX (RX Only) - Bolt 6 receivers can pair with up to four transmitters at a time. Switch TX allows you to quickly switch from one paired transmitter's camera feed to another paired transmitter. This feature is especially useful in multi-camera situations when you need to switch to a different camera's view mid-shoot, without having to perform the pairing process every time.
  • Page 12 Teradek User Manual Mode, even if they were previously paired. You must use a Bolt 6 XT MAX receiver. Otherwise, the receiver's OLED will display Broadcast Not Supported. Enable Fixed Frequency - Fixed Frequency Mode allows your transmitter to designate a specific non- DFS channel within the selected wireless region for use, providing a stronger connection in difficult environments.
  • Page 13 Teradek User Manual ◦ 3D LUT Presets - Select a specific look from the list of 3D LUT presets. ◦ 3D LUT Mode - Select whether the look is applied to the entire video output (Full Screen) or half (Split Screen).
  • Page 14 Teradek User Manual Advanced/System Settings Lock Keypad - The Lock Keypad feature prevents the menu joystick from being used to avoid any accidental or unauthorized configurations. There are two ways to lock the keypad: • Navigate to Advanced Settings via the front panel and select Lock Keypad.
  • Page 15 Teradek User Manual Additional Information Device Info - Displays the model and serial number of the device Firmware Versions - Displays the current firmware versions for all device components. Regulatory - Displays all compliance certifications and certification markings related to radio frequencies used by the TX and RX to communicate.
  • Page 16 Teradek User Manual • Settings (Descriptions listed in Transmitter Menu section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings. • Status - Displays the current status of: ◦ Video Input ◦...
  • Page 17 Teradek User Manual • Status - Displays the current status of: ◦ TX Name ◦ Network Status ◦ Link ◦ Video Input ◦ Current Frequency ◦ Range ◦ Quality ◦ Temperature ◦ Camera Recording ◦ Bandwidth ◦ Region ◦ Video Output ◦...

  • Page 18: Bolt 6 Lt Quick Start Guide

    The Bolt 6 LT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 LT video Transmitter and Receiver.
  • Page 19 Teradek User Manual Table of Contents...
  • Page 20 Teradek User Manual WHAT'S INCLUDED PHYSICAL PROPERTIES POWER AND CONNECT PAIRING POWER CABLES MOUNTING TX/RX CONFIGURATION MENUS Wireless Settings ◦ Video Settings ◦ ◦ Tools ◦ Advanced/System Settings ◦ Additional Information BOLT APP OTHER RESOURCES What's Included • Bolt 6 LT Transmitter and Receiver •...
  • Page 21 Teradek User Manual Physical Properties Power and Connect 1. Connect your power source to the transmitter and receiver using the included A/C adapter. If both devices are equipped with battery plate accessories, attach a compatible battery (Gold or V mount).
  • Page 22 Teradek User Manual 1. Using the Menu Joystick, navigate to the Pair menu on both the transmitter and the receiver front panel. 2. Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within range and automatically pair to the receiver.
  • Page 23 Teradek User Manual Power Cables 2-Pin Power Connector Bolt devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector. * Pin 1 is closest to the red dot on the connector. Input Voltage: 6-28V DC...
  • Page 24 Teradek User Manual Mounting WITHOUT DUAL MOUNT Bolt 6 LT devices have a 1/4”-20 threaded hole and two M3 threaded holes on the bottom for mounting the included light stand adapter or any other mounting accessory. CAUTION: DO NOT OVERTIGHTEN SCREWS INSERTED INTO THE THREADED HOLES. Doing ...
  • Page 25 Teradek User Manual frequency is less crowded than the 5GHz frequency, resulting in faster connections and less interference. NOTE: The 6GHz band is intended for indoor use only Enable Broadcast Mode (Bolt 6 LT MAX transmitters only) - Broadcast Mode allows you to transmit to multiple receivers simultaneously (non-DFS frequencies only), while also extending your Bolt 6's transmission range.
  • Page 26 Teradek User Manual Video Settings 3D LUT Settings (RX Only) - The 3D LUT settings menu contains specific looks that can be applied to your video output that either match or simulate how the video will appear after editing, along with options for how they are overlayed on your video output (Full or Split-screen).
  • Page 27 Teradek User Manual Advanced/System Settings Lock Keypad - The Lock Keypad feature prevents the menu joystick from being used to avoid any accidental or unauthorized configurations. There are two ways to lock the keypad: • Navigate to Advanced Settings via the front panel and select Lock Keypad.
  • Page 28 Teradek User Manual Additional Information Device Info - Displays the model and serial number of the device Firmware Versions - Displays the current firmware versions for all device components. Regulatory - Displays all compliance certifications and certification markings related to radio frequencies used by the TX and RX to communicate.
  • Page 29 Teradek User Manual • Settings (Descriptions listed in Transmitter Menu section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings. • Status - Displays the current status of: ◦ Video Input ◦...
  • Page 30 Teradek User Manual • Status - Displays the current status of: ◦ TX Name ◦ Network Status ◦ Link ◦ Video Input ◦ Current Frequency ◦ Range ◦ Quality ◦ Temperature ◦ Camera Recording ◦ Bandwidth ◦ Region ◦ OSD name Other Resources •...

  • Page 31: Bolt 6 Lt-Hdmi Quick Start Guide

    The Bolt 6 LT HDMI Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 seconds.
  • Page 32 Teradek User Manual Table of Contents...
  • Page 33 Teradek User Manual WHAT'S INCLUDED PHYSICAL PROPERTIES POWER AND CONNECT PAIRING POWER CABLES MOUNTING TX/RX CONFIGURATION MENUS Wireless Settings ◦ Bluetooth Settings ◦ ◦ Display Settings ◦ Reset All Settings ◦ Device Info Firmware Versions ◦ BOLT APP OTHER RESOURCES What's Included •...
  • Page 34 Teradek User Manual Physical Properties Power and Connect 1. Connect your power source to the transmitter and receiver using the included A/C adapter. If the receiver is equipped with a battery plate, attach a compatible battery (Gold or V mount).
  • Page 35 Teradek User Manual 2. Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within range and automatically pair to the receiver. 3. Once paired, the front panel will indicate whether or not Pairing is successful.
  • Page 36 Teradek User Manual Power Cables 2-Pin Power Connector Bolt devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector. * Pin 1 is closest to the red dot on the connector. Input Voltage: 6-28V DC...
  • Page 37 Teradek User Manual Mounting Bolt 6 LT devices have a 1/4”-20 threaded hole and two M3 threaded holes on the bottom for mounting the included light stand adapter or any other mounting accessory. CAUTION: DO NOT OVERTIGHTEN SCREWS INSERTED INTO THE THREADED HOLES. Doing ...
  • Page 38 Teradek User Manual 2. Specific non-DFS 5GHz channels NOTE: By default, Bolt 6 LT-HDMI will select the lowest available frequency from the Frequencies list if one has not been selected beforehand. Select Bandwidth - Choose between 20MHz and 40MHz bandwidth options Select Frequency - Select which frequency to use (determined by Fixed Frequency Mode selection).
  • Page 39 Teradek User Manual Bolt App Use the Bolt App to remotely manage and monitor every parameter of Bolt 6 including pairing, frequency selection, and 3D LUTs. CONNECT VIA BLUETOOTH 1. Download the Bolt App. 2. Enable Bluetooth on your iOS or Android device.
  • Page 40 Teradek User Manual ◦ OSD name Receiver Status Display • Settings (Descriptions listed in Receiver Menu section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
  • Page 41 Teradek User Manual Other Resources • USER MANUAL: https://guide.teradek.com/m/112641 • FIRMWARE UPGRADE: https://teradek.com/pages/downloads#bolt6 Bolt 6 Page 41...

  • Page 42: Bolt 6 Monitor Module Quick Start Guide

    The Bolt 6 Monitor Module (TX or RX) is a real-time wireless video transmitter that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series.
  • Page 43 Teradek User Manual Table of Contents...
  • Page 44 Teradek User Manual PHYSICAL PROPERTIES POWER AND CONNECT PAIRING ◦ Pairing via Smart 7 Monitor ◦ Pairing via Bolt App BOLT APP Transmitter Status Display ◦ Receiver Status Display ◦ MODULE CONFIGURATION MENUS ◦ TX Module Configuration ◦ RX Module Configuration...
  • Page 45 1. Swipe right on the monitor’s touchscreen, then tap on the Settings option once it appears. 2. Scroll back up and tap to select the TERADEK BOLT 4K option, then tap Pair new receiver. 3. Enable Pairing on the Bolt 6 receiver(s)or by selecting Pair on the front panel menu. The Monitor Module will begin scanning for receivers to automatically pair with.
  • Page 46 Teradek User Manual PAIRING TIPS  If you’re having trouble getting units to pair, we recommend keeping the transmitter and receiver six feet apart when pairing. Keep all other RF devices nearby turned off or out of range to ensure the transmitter and receiver are only detecting each other. To eliminate any chance of interference, perform the Wired Pairing process via Bolt Manager.
  • Page 47 Teradek User Manual Transmitter Status Display • Settings (Descriptions listed in the Transmitter Menu section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings. • Status - Displays the current status of: ◦...
  • Page 48 Teradek User Manual Receiver Status Display • Settings (Descriptions listed in Receiver Menu section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
  • Page 49 Module Configuration Menus Bolt 6 Monitor Modules can be configured using the Smart 7 Monitor's built-in interface. Once connected, tap the TERADEK BOLT 4K tab. TX Module Configuration Paired Receivers - This screen displays all paired receivers (if any), and allows you to pair or unpair additional receivers with the TX module.
  • Page 50 Teradek User Manual ◦ Rename transmitter (TX) - Rename the transmitter so that it’s easier to identify among other Bolt systems that are present. ◦ Video quality - Select a video quality setting to modify or balance the range and reliability of the signal.
  • Page 51 Teradek User Manual • Rename receiver (RX) - Rename the receiver so that it’s easier to identify among other Bolt systems that are present. • Frequency mode - Select either AUTO or FIXED mode. • Selected Frequency - Specify which frequency to use whenever Fixed Frequency Mode is enabled.

  • Page 52: Bolt 6 Lt Tx (Japan) Quick Start Guide

    It is a real-time wireless video transmission system that supports 4K video with Teradek's patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set's included Bolt 6 LT video Transmitter and Receiver.
  • Page 53 Teradek User Manual Table of Contents...
  • Page 54 Teradek User Manual WHAT'S INCLUDED PHYSICAL PROPERTIES POWER AND CONNECT PAIRING POWER CABLES TX/RX CONFIGURATION MENUS ◦ Wireless Settings Video Settings ◦ Tools ◦ ◦ Advanced/System Settings ◦ Additional Information BOLT APP OTHER RESOURCES What's Included • Bolt 6 LT Transmitter w/Internal Antenna and Receiver w/External Antenna •...
  • Page 55 Teradek User Manual Physical Properties Power and Connect 1. Connect your power source to the transmitter and receiver using the included A/C adapter. If both devices are equipped with battery plate accessories, attach a compatible battery (Gold or V mount).
  • Page 56 Teradek User Manual 1. Using the Menu Joystick, navigate to the Pair menu on both the transmitter and the receiver front panel. 2. Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within range and automatically pair to the receiver.
  • Page 57 Teradek User Manual Power Cables 2-Pin Power Connector Bolt devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector. * Pin 1 is closest to the red dot on the connector. Input Voltage: 6-28V DC...
  • Page 58 Teradek User Manual TX/RX Configuration Menus Wireless Configuration Switch TX (RX Only) - Bolt 6 receivers can pair with up to four transmitters at a time. Switch TX allows you to quickly switch from one paired transmitter's camera feed to another paired transmitter. This feature is especially useful in multi-camera situations when you need to switch to a different camera's view mid-shoot, without having to perform the pairing process every time.
  • Page 59 Teradek User Manual Video Quality - The Video Quality menu lets you adjust the balance between your signal’s maximum range and quality according to the number of antennas used to transmit fine information. Bolt 6 LT has three picture quality levels that vary based on the lowest quality link or the furthest receiver.
  • Page 60 Teradek User Manual Spectrum Analyzer (RX Only) - The built-in Spectrum Analyzer provides a visual indication of channel noise and saturation across the entire available frequency range. Move the Menu joystick left and right to select a frequency. Frequencies are represented by bars; the higher the bar, the more congested that frequency is.
  • Page 61 Teradek User Manual tool that indicates to the crew that a signal has been dropped and the TX and RX need to be synced again. Reset All Settings - Reset all configurable options to their factory settings. Additional Information Device Info - Displays the model and serial number of the device Firmware Versions - Displays the current firmware versions for all device components.
  • Page 62 Teradek User Manual Transmitter Status Display • Settings (Descriptions listed in Transmitter Menu section) - Tap the settings button on the top right corner of the screen to customize the transmitter’s various settings. • Status - Displays the current status of: ◦...
  • Page 63 Teradek User Manual Receiver Status Display • Settings (Descriptions listed in Receiver Menu section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.
  • Page 64 Teradek User Manual Other Resources • USER MANUAL: https://guide.teradek.com/m/112641 • FIRMWARE UPGRADE: https://teradek.com/pages/downloads#bolt6 Bolt 6 Page 64...

  • Page 65: Bolt 6 Xt Tx (Japan) Quick Start Guide

    It is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.
  • Page 66 Teradek User Manual Table of Contents...
  • Page 67 Teradek User Manual WHAT'S INCLUDED PHYSICAL PROPERTIES POWER AND CONNECT PAIRING POWER CABLES TX/RX CONFIGURATION MENUS ◦ Wireless Settings Video Settings ◦ Tools ◦ ◦ Advanced/System Settings ◦ Additional Information BOLT APP OTHER RESOURCES What's Included • Bolt 6 XT Transmitter w/Internal Antenna and Receiver w/External Antenna •...

  • Page 68: Physical Properties

    Teradek User Manual Physical Properties Power and Connect 1. Connect your power source to the transmitter and receiver using the included A/C adapter. If both devices are equipped with battery plate accessories, attach a compatible battery (Gold or V mount).
  • Page 69 Teradek User Manual 1. Using the Menu Joystick, navigate to the Pair menu on both the transmitter and the receiver front panel. 2. Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within range and automatically pair to the receiver.
  • Page 70 Teradek User Manual Power Cables 2-Pin Power Connector Bolt devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector. * Pin 1 is closest to the red dot on the connector. Input Voltage: 6-28V DC...
  • Page 71 Teradek User Manual plug in the power cable first, THEN connect the video cable from the camera before powering on the TX unit. TX/RX Configuration Menus Wireless Settings Switch TX (RX Only) - Bolt 6 receivers can pair with up to four transmitters at a time. Switch TX allows you to quickly switch from one paired transmitter's camera feed to another paired transmitter.
  • Page 72 Teradek User Manual NOTE: By default, Bolt 6 XT will select the lowest available frequency from the Frequencies list if one has not been selected beforehand. Bandwidth - Choose between 20MHz and 40MHz bandwidth options Frequencies - Select which frequency to use (determined by Fixed Frequency Mode selection).
  • Page 73 Teradek User Manual ◦ Always show - Always display OSD unless temporarily deactivated by the joystick. Display Settings - Use the Display Settings to control the OLED display operation. By default, the OLED display will invert every 30 minutes. Tools SDI Eye Pattern (TX only) - The SDI Eye Pattern provides a graphical display of the SDI signal coming from the camera to the transmitter, and is useful in determining the amount of interference present.
  • Page 74 Teradek User Manual ◦ Auto ◦ RGB 8bit ◦ RGB 10bit ◦ YCbCR 4:4:4 8bit ◦ YCbCR 4:4:4 10bit ◦ YCbCR 4:2:2 10bit ◦ YCbCR 4:2:0 8bit ◦ YCbCR 4:2:0 10bit Audio (RX only) - Configure Bolt’s Audio settings. If Beep on REC is activated, you will hear a short tone whenever the camera begins or stops recording.
  • Page 75 Teradek User Manual CONNECT VIA BLUETOOTH 1. Download the Bolt App. 2. Enable Bluetooth on your iOS or Android device. 3. Navigate to the Bluetooth menu on both the transmitter and receiver, then select Enable. 4. Open the Bolt App from your iOS or Android device, then tap the Bolt Devices button.
  • Page 76 Teradek User Manual Receiver Status Display • Settings (Descriptions listed in Receiver Menu section) - Tap the settings button on the top-right corner of the display to customize the receiver’s various settings such as the output format, audio, display, and OSD.

  • Page 77: Bolt 6 Xt System

    Teradek User Manual Other Resources • USER MANUAL: https://guide.teradek.com/m/112641 • FIRMWARE UPGRADE: https://teradek.com/pages/downloads#bolt6 Bolt 6 XT System A: RP-SMA connectors G: USB-C port B: 10-28V DC power input H: OLED display C: 5-Pin USB port I: Menu joystick D: HDMI input...
  • Page 78 Teradek User Manual Bolt 6 Page 78...

  • Page 79: Bolt 6 Lt System

    Teradek User Manual Bolt 6 LT System A: RP-SMA connectors F: OLED display B: 6-28V DC power input G: Menu joystick C: HDMI input H: Power switch D: 3G-SDI output I: USB port (not shown) E: 3G-SDI input J: HDMI output Receiver Antennas This image illustrates the order of the receiver's antennas.

  • Page 80: Bolt 6 Lt-Hdmi

    Teradek User Manual Bolt 6 LT-HDMI A: RP-SMA connectors F: OLED display B: 6-28V DC power input G: USB-C port C: 5-pin USB port H: Menu joystick D: HDMI output I: Power switch E: HDMI input Receiver Antennas This image illustrates the order of the receiver's antennas. The numbers below correspond to the...

  • Page 81: Bolt 6 Monitor Module (Tx/Rx)

    Teradek User Manual Bolt 6 Monitor Module (TX/RX) A. RP-SMA connectors E. Micro USB B. AUX input F: HDMI input/output C. 6-18V DC input G: P-Tap input D: Compression pins Device Operation • Keep the transmitter and receiver at close range for 60 seconds after powering on the devices. This allows them to scan for and select the best wireless frequency.

  • Page 82: Power And Connect

    Teradek User Manual Power and Connect Bolt 6 XT/LT 1. Connect power to the Bolt transmitter and receiver with the included A/C adapter, or if both devices are equipped with battery plate accessories, attach a compatible battery (Gold or V mount).
  • Page 83 Teradek User Manual Bolt 6 Page 83...

  • Page 84: Power Cables

    Teradek User Manual Power Cables 2-Pin Power Connector Bolt devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector. * Pin 1 is closest to the red dot on the connector. Input Voltage: 10-28V DC...

  • Page 85: Wireless Configuration

    Teradek User Manual plug in the power cable first, THEN connect the video cable from the camera before powering on the TX unit. Wireless Configuration Bolt 6 contains several wireless configuration options that allow the system to work at its best in different environments.
  • Page 86 Teradek User Manual Enable Broadcast Mode (Bolt 6 MAX units only) Enabling Broadcast Mode improves the system's maximum transmission range by allowing Bolt MAX systems to operate without any back-channel communication between the receiver and transmitter and reduces any interference.
  • Page 87 Teradek User Manual • 20MHz - Reduces the amount of bandwidth by half, effectively doubling the number of usable frequencies while decreasing interference. • 40MHz - (Default) Increases the amount of bandwidth by bonding two 20MHz frequencies, allowing for faster transfer rates but increased interference.

  • Page 88: Wireless Configuration Recommendations

    Teradek User Manual Wireless Configuration Recommendations Bolt 6 can be used in many different situations that require you to configure the wireless settings to provide the optimal video transmission quality possible. The following table (TX Video Quality Descriptions) describes the Video Quality modes available on the TX. The table below (Recommended...
  • Page 89 Teradek User Manual WIRELESS SETTINGS USER SCENARIOS Band Broadcast Mode Fixed Frequency Bandwidth Video Quality (TX) Longest Range Enabled w/ Longer Distance 5GHz Optional 40MHz (No interference) Panel Antenna Mode Long Range Longer Distance 6GHz Enabled Optional 40MHz (Busy RF)

  • Page 90: Pairing And Unpairing

    Teradek User Manual Pairing and Unpairing Bolt 6 devices purchased as a set (TX and RX) are paired by default, requiring no additional configuration. Bolt 6 devices purchased separately need to be paired using the device's front panel (OLED) menu, Bolt Manager, or the Bolt App. To pair your transmitter with multiple receivers, you will need to use either Bolt Manager or the Bolt App.
  • Page 91 1. Swipe right on the monitor’s touchscreen, then tap on the Settings option once it appears. 2. Scroll back up and tap to select the TERADEK BOLT 4K option, then tap Pair new receiver. 3. Enable Pairing on the Bolt 6 receiver(s)or by selecting Pair on the front panel menu. The Monitor Module will begin scanning for receivers to automatically pair with.
  • Page 92 Teradek User Manual Pairing/Unpairing via the Bolt App TO PAIR: 1. Open the Bolt App from your iOS or Android device, then tap the Pairing button. 2. Select the transmitter you wish to pair, then tap the Next button. 3. Select the receiver(s) you wish to pair with the transmitter, then tap the Pair! button. The Bolt App will indicate when the pairing process is complete.

  • Page 93: Video Settings Configuration

    Teradek User Manual Video Settings Configuration Display Settings Use the Display Settings to control the OLED display operation. By default, the OLED display will invert every 30 minutes. You can set the display to invert every 30 minutes (lengthens the display life), or it can dim or turn off after either 10 minutes or 10 seconds.
  • Page 94 Teradek User Manual • Continuous Output - Video signal output stays constant when using a monitor or recorder that is sensitive to video signal changes. • Same as Input - Matches the transmitter's video source resolution. • SD - Matches the TX frame rate and outputs SD resolution.

  • Page 95: Tools

    Teradek User Manual Tools SDI EYE PATTERN (TX) The SDI Eye Pattern provides a graphical display of the SDI signal coming from the camera to the transmitter, and is useful in determining the amount of interference present, or if the SDI cable is damaged.
  • Page 96 Teradek User Manual Frequencies are represented by bars; the higher the bar, the more congested that frequency is. Bars without a dot (1) indicate the frequency is not as saturated and can be used. Bars with a dot (2) indicate the frequency is too saturated to connect to.
  • Page 97 Teradek User Manual Perform Antenna Test 1. Attach antennas to both the TX and RX. Ensure that the antennas are tightened and secured to the device. 2. Ensure that the TX and RX are paired. If not, visit the Pairing section for instructions on pairing your devices.

  • Page 98: Advanced Settings

    Teradek User Manual Advanced Settings LOCK KEYPAD Enabling the Lock Keypad feature prevents the menu joystick from being used to avoid any accidental or unauthorized configurations. There are two ways to lock the keypad: • Navigate to Advanced Settings via the front panel and select Lock Keypad.
  • Page 99 Teradek User Manual AUDIO (RX only) Configure Bolt’s Audio settings. If Beep on REC is activated, you will hear a short tone whenever the camera begins or stops recording. The Mute Settings allow you to completely mute audio or only mute audio while recording.

  • Page 100: Info

    Teradek User Manual Info DEVICE INFO Reset all configurable options to their factory defaults. FIRMWARE VERSIONS Displays the current firmware versions for all device components. REGULATORY Displays all compliance certifications relating to radio frequencies used by the TX and RX to communicate.

  • Page 101: Bolt Manager

    Teradek User Manual Bolt Manager With Bolt Manager, you can configure all of your Bolt 6 devices at once. Available as software for Windows and Mac, Bolt Manager allows you to pair multiple receivers to your transmitter, select frequencies, load 3D LUTs, and perform firmware upgrades.
  • Page 102 Teradek User Manual COLOR PROCESSING Color processing allows users to apply 3D LUTs directly to the receiver’s video output or to add, remove, and modify up to 16 LUTs stored in Bolt 6’s memory. Live LUT - Click Load and browse for a 3D LUT file to apply to the video output. The following file formats are supported: •...
  • Page 103 Teradek User Manual UPGRADE Teradek releases firmware updates periodically that add new features, improve performance, and fix vulnerabilities. To update Bolt 6, you’ll need to load a firmware package into Bolt Manager. • Load from Web - If you have an Internet connection, click Load from Web to download the latest firmware package from Teradek’s servers.

  • Page 104: Bolt App

    Teradek User Manual Once the firmware is loaded, and information about the package is displayed, click Next to proceed with the upgrade. You will then be presented with a list of device components and whether or not they are scheduled to be updated, along with two options: •...
  • Page 105 Teradek User Manual ▪ Spectrum Analyzer - Detects congestion in the area and determines which frequencies are available to use. Each bar represents a frequency, and the height represents the amount of congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar.

  • Page 106: Device Placement

    Teradek User Manual congestion in that frequency; the higher the bar, the more congested that frequency is. Make sure to always select the shortest, least congested bar. ▪ Status - Displays the current status of: ● TX Name ● Quality ●...
  • Page 107 Teradek User Manual With Dual Mount Depending on the model, Bolt 6 XT/LT devices are equipped with a dual mount battery plate that allows you to attach your device to either the back of a camera, monitor, or Bolt Panel Antenna.

  • Page 108: Antenna Orientation

    Teradek User Manual Antenna Orientation Bolt 6 transmitters and receivers require the use of external antennas for basic operation. Different conditions will determine the type, orientation, and placement of the antennas. Vertical and Horizontal Antennas Vertical (V) antennas are included as a standard item with your Bolt 6, offering good performance in a wide variety of short-to-medium range situations when quick setup and flexibility are key.

  • Page 109: Regulatory Information

    Operating the product without regulatory approval is illegal. Any changes or modifications to the product not expressly approved by Teradek could void the user's authority to operate the equipment and its regulatory approvals. Please make sure you use the latest revision of this document which is available at teradek.com.
  • Page 110 Any changes or modifications could void the user's authority to operate the equipment and invalidate the regulatory approval. ANTENNA REQUIREMENTS The product is provided with approved antennas. Use only antennas supplied by TERADEK. Any changes or modifications to the antenna may void the regulatory approvals obtained for the product. USING THE AC POWER ADAPTOR •...
  • Page 111 Teradek User Manual • The use of a battery is not allowed for the Bolt 6 Transmitter or the Bolt 6 LT Transmitter in UNII5. RF MODULES These devices contain the following approved radio modules: Device Description FCC ID AMN41012...
  • Page 112 Teradek User Manual this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful...
  • Page 113 Teradek User Manual • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help This equipment complies with Part 15 of the FCC rules.
  • Page 114 Teradek User Manual client device. In all cases, an exception exists for transmitting brief messages to an access point when attempting to join its network after detecting a signal that confirms that an access point is operating on a particular channel.
  • Page 115 This equipment may be operated in all EU countries with the following restrictions: • 5.925 - 6.425GHz frequencies for indoor use only Teradek hereby declares that this Radio Transmitter is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU, 2011/65/EU, and 2015/863/EU. The full text of the EU DoC is located at: https://support.cs.inc/s/article/What-is-the-EC-Declaration-of-Conformity-...
  • Page 116 SUPPORT RESOURCES In addition to this Reference Guide, you can find more information on Bolt 4K devices' features and operation by visiting www.teradek.com. If you are unable to find what you need online, please contact Teradek’s support staff. E-mail: support@teradek.com | Phone: (888) 941-2111 ext. 2 (available M-F 7 am-6 pm PST) DISCLAIMER This manual is intended for user information only.

  • Page 117: Bolt 6 U-Nii-5 (6Ghz) Support By Region

    Bolt products, regulatory restrictions mean that U-NII-5 operation is allowed only in the regions where it has been cleared for use. As different regions approve U-NII-5 for unlicensed operation, Teradek will release firmware updates to enable the additional frequencies. Note that we sometimes refer to U- NII-5 frequencies as “6GHz”...
  • Page 118 U-NII-5 (6GHz) support by region Teradek products are built to comply with regulatory requirements for all markets in which they are sold. As such, we can only enable U-NII-5 support in the regions where it is approved for license-free use.

  • Page 119: Frequencies By Region

    Teradek User Manual Frequencies by Region NOTE: Pairing the TX and RX is required after a different region is selected. Bolt 6 XT System BOLT 6 XT SYSTEM BOLT 6 XT TRANSMITTER BOLT 6 XT RECEIVER VIDEO 1x 12G-SDI SMPTE 2082-1 standard/75 Video Inputs Ω...
  • Page 120 Teradek User Manual <0.001sec (without format Delay (TX to RX) conversions) 4Kp23.98/24/25/29.97/30/50/59.94/60 1080p23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 Supported 1080i50/59.94/60 Resolutions 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i (NTSC)/576i (PAL) Input Cross Yes (HDMI input to SDI loopout) Conversion Output Video Yes (deinterlacer, frame rate converter,...
  • Page 121 Teradek User Manual Embedded SDI/HDMI Audio Output Audio Output (2 Channel) PHYSICAL ATTRIBUTES Dimensions 5.2” x 3.6” x 1.1” (132 x 91 x 27mm) 4.4” x 5.5” x 1.1” (112 x 139 x 27mm) Weight 12.1oz (344g) 15.2oz (430g) Construction...
  • Page 122 Teradek User Manual MAX: 5x External 2dBi antennas, 2x MAX: 4x External 2dBi antennas, H-V antennas 750/1500: 5x External Antennas 2x H-V antennas 750/1500: 4x External 2dBi antennas 2dBi antennas MAX: Up to 3000ft (914m) line of sight (5000ft [1524m] with optional Bolt Panel...

  • Page 123: Bolt 6 Lt System

    Teradek User Manual Bolt 6 LT System BOLT 6 LT SYSTEM BOLT 6 LT TRANSMITTER BOLT 6 LT TRANSMITTER VIDEO 1x 3G-SDI SMPTE 424M standard/75 Ω Video Inputs (BNC x 1), 1x HDMI 1.4b Type-A receptacle 1x 3G-SDI SMPTE 424M standard/75 Ω...
  • Page 124 Teradek User Manual outputs) VIDEO PROCESSING Video Visually lossless Compression Test Pattern Generator Spectrum Analyzer AUDIO Audio 48kHz 24-bit PCM 48kHz 24-bit PCM Compression Embedded SDI/HDMI Audio Input Audio Input (2 channel) Embedded SDI/HDMI Audio Input Audio Output (2 channel)
  • Page 125 Teradek User Manual Compatibility NETWORK DFS Frequencies: DFS Frequencies: 5.270 ~ 5.670 GHz 5.270 ~ 5.670 GHz Wireless Non-DFS Frequencies: Non-DFS Frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, and 5.945 ~ 6.425GHz and 5.945 ~ 6.425GHz...
  • Page 126 Teradek User Manual None, optional Sony/Canon dual None, optional Gold or V mount battery Battery battery plate plate Nominal Power 9 Watts 11 Watts Consumption Operating 32~104°F (0~40°C) 32~104°F (0~40°C) Temperature GENERAL Multiple mounting options with M3 and Multiple mounting options with 3/ Mounting 1/4-20”...

  • Page 127: Bolt 6 Lt-Hdmi System

    Teradek User Manual Bolt 6 LT-HDMI System BOLT 4K LT-HDMI TRANSMITTER BOLT 4K LT-HDMI RECEIVER VIDEO Video Inputs 1x HDMI 1.4b Type-A receptacle Video Outputs 1x HDMI 1.4b Type-A receptacle 1x HDMI 1.4b Type-A receptacle SDI Ancillary Data Support YCbCr 4:2:2 10-bit...
  • Page 128 Teradek User Manual AUDIO Audio 48kHz 24-bit PCM 48kHz 24-bit PCM Compression Embedded HDMI Audio Input (2 Audio Input channel) Embedded HDMI Audio Input Audio Output (2 channel) PHYSICAL ATTRIBUTES Dimensions 2.4” x 4.1” x 1.3” (60 x 103 x 33mm) 4.8”...
  • Page 129 Teradek User Manual Encryption AES-256, RSA-1024 key exchange AES-256, RSA-1024 key exchange 19 dbm EIRP (2x external 2dBi 17 dbm EIRP (1x external 2dBi RF Power antennas; antenna; <80mW transmit power) <51mW transmit power) Antennas 2x External 2dBi antennas 5x External 2dBi antennas...

  • Page 130: Bolt 6 Monitor Module

    Teradek User Manual Bolt 6 Monitor Module BOLT 6 MONITOR MODULE (TX/RX) VIDEO Video Input/Output 1x HDMI 1.4b Type-A receptacle, feeds into Smart 7 HDMI input v SDI: YCbCr 4:2:2 Color Sampling 10-bit/HDMI: RGB 4:4:4, 8-bit Delay (TX to RX) <0.001sec (without format conversions)
  • Page 131 Teradek User Manual Construction Milled aluminum (chassis), regulation-compliant PCB INTERFACES Configuration Interface SmallHD Monitor UI Switches Desktop App Mobile App Bolt App (iOS and Android) SmallHD Monitor UI, USB Interface Functionality 2x 5-pin Locking Connector CCU (Host) Bluetooth Compatibility Via SmallHD Monitor...
  • Page 132 Teradek User Manual Power Input 2-Pin locking connector 6-18V DC TX Module: None, optional Sony/Canon dual battery plate Battery RX Module: None, optional Gold or V mount battery plate Nominal Power Consumption 6 Watts Operating Temperature 32~104°F (0~40°C) GENERAL Mounting Mounts in between SmallHD Smart 7 monitor and battery plate.

  • Page 133: Bolt Panel Antenna V.4

    Teradek User Manual Bolt Panel Antenna v.4 BOLT PANEL ANTENNA V.4 WIRELESS Frequency Range 4.9 - 7.5 GHz Gain 14 and 16dBi Polarization 2x Horizontal, 5x Vertical for polarization Beam-width deg horizontal 75° 35° Beam-width deg vertical Impedance 50 ohm...

This manual is also suitable for:

Bolt 6 xtBolt 6 ltBolt 6 lt hdmiBolt 6 txBolt 6 rx

Table of Contents

Save PDF