Download Print this page

TechniSat CLASSIC 100 Manual page 10

Advertisement

The appliance may only be powered by batteries/batteries approved for use in
this appliance.
Normal batteries may not be recharged. Batteries must not be reactivated
by other means, disassembled, heated or thrown into an open flame
(danger of explosion!).
Clean the battery contacts and the device contacts before insertion. Incorrect
insertion of batteries/batteries risks explosion!
Only replace batteries/batteries with the correct type and model number.
Caution! Do not expose batteries to extreme conditions.
Do not place on radiators, do not expose to direct sunlight!
Leaking or damaged batteries/batteries can cause burns on contact with the
skin. Use suitable protective gloves in this case. Clean the battery
compartment with a dry cloth.
If the device is not used for a long time, remove the batteries.
Improper handling of batteries/accumulators poses the risk of explosion!
* BATTERIES NOT INCLUDED
4.3.4
Using headphones
Hearing damage!
Do not listen to the radio at high volume through headphones. This may cause
permanent damage to your hearing. Before using headphones, set the volume of the
device to the minimum.
Only use headphones with a 3.5-millimetre plug.
>
Insert the headphone plug into the headphone socket of the device. The sound
is now only played through the headphones, the speaker is muted.
>
If you want to listen through the speakers again, remove the headphone plug
from the device's headphone socket.
The sound from the headphone output is monophonic.
4.4 General device functions
4.4.1 Switching on the device
>
To ensure good FM reception, please fully extend the telescopic
antenna, which is located on the back of the unit.
>
Slide the switch to the ON position on the device.
10
EN

Advertisement

loading

This manual is also suitable for:

76-4820-0076-4820-01