Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic RSX8-850
Summary of Contents for Nordic RSX8-850
- Page 1 CORDED RECIPROCATING SAW OPERATING MANUAL RSX8-850...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage / Frequency: 230-240V ~ 50Hz Rated Power: 850W No-Load Speed: 0-2800rpm Max Cutting Capacity: Wood: 105mm, Steel: 10mm Cable Length: Adaptor Type: SAA Plug GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. - Page 3 NORDIC 2.3 PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
- Page 4 NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. Special safety instructions for Reciprocating Saw • Hold the machine only by the insulated handle surfaces when carrying out tasks during which it is possible that the tool inserts will come across hidden power cables or its own cagle.
-
Page 5: Operation
NORDIC • Setting the saw position The saw can be set to one of three positions (0°, +/- 90°). To change the saw position, push the locking button in the direction of the arrow. Rotate the handle to bring the saw shoe to the desired position. - Page 6 NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;...
-
Page 7: Cleaning And Maintenance
NORDIC CLEANING AND MAINTENANCE 9.1 CLEANING • Keep the ventilation slots of the machine clean to prevent overheating of the engine. • Regularly clean the machine housing with a soft cloth, preferably after each use. • Keep the ventilation slots free from dust and dirt. - Page 8 NORDIC PARTS OF RECIPROCATING SAW 1. Power button 2. Blade 3. Handle 4. Lock button 5. Cable...