Nowy Styl BJARG Quick Start Manual

Thank you for purchasing our product.
Read the manual before assembling and using the chair.
This is a standard assembly instructions for a not assembled version.
The methods of assembly and use depend on the options you have selected for the product.
All the pictures included in the manual are purely illustrative.
Optionally
Headrest
Armrests
C

Assembly manual

I
II
R
Z
Z1
Z2
BJARG
Note: For soft floors, use H-type castors
with hard rolls (one-coloured).
For hard floors, use W-type castors
with soft rolls (two-coloured).
R35K2-SB2
R35K3-SB2
Screw
M6x16
II
Pad
Screw
M6x30
III
1
M.
III

Adjustment range

R35K2-SB2
- Back and forth sliding armrest's pads
R35K3-SB2
- The arm height adjustment - R.
- The armrest's width adjustment - press Z lever:
Z1 - Locked
Z2 - Unlocked
+
(only R35K2-SB2, R35K3-SB2).
EAST
- The backrest height adjustment:
The backrest returns to the lowest position, once the highest position is passed. In order to adjust the backrest to
your desired position first slide the backrest fully up and let itself to slide down, then gradually move up the backrest
to the required position.
- Headrest angle adjustment, headrest height adjustment
- Lumbar support depth adjustment - C (LSD2).
R
FS, FST, ER, ERT, ERTN, EAST
2 3
M. M.
IV
SYNCROIBRA-TR
(only R35K3-SB2, R35K3).
(HRUA).
R35K2
R35K3
4
Screw
M8x16
M.
M.
GBUNI46