Table of Contents
Advertisement
Safety Precautions
following Safety Precautions before you start using the device.
Please read the
•
Keep this user guide in a safe place for later reference.
•
Read all warnings and follow all instructions.
•
Do not use the device near water. To reduce the risk of fire or electric shock, do
not expose the device to moisture.
•
Never remove the rear cover. This display contains high-voltage parts. You may
be seriously injured if you touch them.
•
Avoid exposing the device to direct sunlight or other sources of sustained heat.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that may increase the temperature of the
device to dangerous levels.
•
Use a soft, dry cloth to clean the external housing. For more information, refer
to the "Maintenance" section.
•
When moving the device, be careful not to drop or bump the device on
anything.
•
Do not place the device on an uneven or unstable surface. The device may fall
over resulting in an injury or a malfunction.
•
Do not place any heavy objects on the device or connection cables.
•
If smoke, an abnormal noise, or a strange odor is present, immediately turn the
device off and call your dealer or ViewSonic®. It is dangerous to continue using
the device.
•
The device is a monitor with an LED backlight intended for general office use.
•
Do not attempt to circumvent the safety provisions of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the plug does not
fit into your outlet, obtain an adapter and do not attempt to force the plug into
the outlet.
•
When connecting to a power outlet, DO NOT remove the grounding
prong. Please ensure grounding prongs are NEVER REMOVED.
•
Protect the power cord from being treaded upon or pinched,
particularly at the plug, and at the point where it emerges from
the equipment. Ensure that the power outlet is located near the
equipment so that it is easily accessible.
3
Advertisement
Table of Contents
