Panasonic CQ-FX820 Operating Instructions Manual page 33

Mounting the Center Speaker (EAB-CF2) (Option for CQ-FX820N only)
® Attach the two pieces of Velcro Tape (hook side) to the rear of the Center Speaker (Fig. 10).
® Attach the other two pieces of Velcro Tape (loop side) on a flat surface of the dashboard as close as possi-
ble to the center (Fig. 11).
@ Connect the speaker cord referring to the electrical connection and mount the Center Speaker (Fig. 11).
Fig: 19 Velcro Tape (hook side) (Option)
Fig. 11
Mount the center speaker on the dashboard as
close to its center as possiible.
Center Speaker (EAB-CF2: Option)
Peel off paper
Velcro Tape
Peel off paper (loop side) (Option)
Center Speaker (EAB-CF2: Option)
Note: The Velcro Tape fastener comes in pairs of loop (soft to the touch) and hook (hard to the touch)
pieces. The loop and hook pieces must be used always in pairs. Stick two loop pieces to the car body and
two hook pieces to the speaker, or vice versa.
CQ-FX820/FX720N 47
moH-rozm
Qo Oo