Advertisement
Xmwn-ro2zm
nN ~
44
Installation
Preparation
® Before installation, check the radio operation with antenna and speakers.
® Disconnect the cable from the negative (—) battery terminal (see caution below).
In-dash Installation
has an opening for this unit as shown in Fig. 6. The car's
dashboard should have a thickness of 4.5 mm
-
6 mm in order to make the installation of the unit.
Installation Precautions
This product, if possible, should be installed by a professional installer.
182 mm
Fig. 6
Installation Opening
In-dash installation can be done if the car's dashboard
1
3. Connect the power lead (red) after all other connections are made.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
Supplied Hardware
Item
"Diagram:
Remote Control Unit
1
@® | Mounting Collar
SS
7
4
@® | Mounting Bolt (5 mma)
oS
Trim Plate
INS
1
fj.
Lithium Battery
@® | Power Connector
eT
(CR2025)
<>)
1
|
®
Removable Face Plate
ISO Antenna Adaptor
>
1
CQ-FX820/FX720N
Advertisement
