Advertisement
Initial Time Setting
Press [BAND] to change to AM mode.
@ Press [== ](DISP/CT), "NO CT" appears on the display.
@ Press and hold [@](DISP/CT)
again for more than 2 seconds,
"hours" blinks and the time setting mode is activated.
@ To set hours, press [/\ TUNE] or [\/ TUNE].
Hold [/\ TUNE] or [\/ TUNE] to change numbers rapidly.
@ Press [= ](DISP/CT) again for minutes setting.
© To set minutes, press [/\ TUNE] or [\/ TUNE].
© After setting the time, press [ ](DISP/C7).
E
N
G
L
|
Ss
H
=
nN
Notes:
© lf CT display is kept on, it remains on even if [SOURCE](PWR) and
accessory are turned off and back on again.
@ In other modes, press [«»](DISP/CT) to get RDS CT-service.
Select Traffic Announcement (TA on) Mode
Press [TA] to switch on and keep it there when you wish to listen to traf-
fic information. Press [TA] again to switch off.
Volume Setting (Only for TA on Mode)
Adjust the volume as desired by pressing [/\VOL] or [\/ VOL] while
receiving Traffic Announcement. (TA)
After volume
for Traffic Announcement
(TA) is set, the difference
between normal volume and TA volume is automatically stored in the
memory (up to 5 levels) so that next traffic information will be received at
the preceding TA volume which may be higher or lower than normal vol-
ume.
Normal volume can be changed up to 5 levels upward or downward.
If the volume level is over 40 or less than 0, any further change will not
be made.
When receiving a station other than TP station (including EON sta-
tions)
A traffic information station is automatically searched for and the radio
automatically stops the next available TP station.
EON capabilities:
EON lets the radio take advantage of much more RDS information than
before. It constantly updates the AF lists for all switch presets far from
home, you will receive an alternative frequency for the same station, or
another station carrying the same program, when such exists. EON also
keeps track of locally available TP station.
1P
FON FAon
CQ-FX820/FX720N
:
29
Advertisement
