Upgrade The Map; Play With Bluetooth Device; Adjust Microphone Position; Pair The Bluetooth-Enabled Devices - Philips CID2780 User Manual

Connect to GPS call center
(Optional)
If your phone is connected to the car audio
system via Bluetooth, you can connect to the
call center of the GPS provider for help.
1
Call 400-886-9545 to register your phone
number to the GPS call center.
2
Pair your mobile phone with the car
audio system (see the section "Pair the
Bluetooth-enabled devices" for details).
3
Tap to display main menu.
4
Tap (Dual-Tone-Multi-Frequency).
» The call center is connected. If failed,
follow the on-screen display to check
connection.
5
Tell the reception where you want to go.
» Navigation routine data will be
transferred to your GPS system and
your car audio will switch to navigation
mode automatically.

Upgrade the map

1
Exit navigation system.
2
Open the card cover.
3
Press on the map card until you hear a
click sound.
4
Pull out the map card and bring it to the
authorized service center for upgrade.
5
Insert the upgraded map card back into
the card slot.
6
Turn on the car audio.
» The map upgrades in a few minutes.
20 EN
7 Play with
Bluetooth
device
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetooth-
enabled device.

Adjust microphone position

For better sound quality in make/receive phone
call through Bluetooth, place the microphone
near the mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
"Connect wires" section).
2
Place the microphone at a proper location.
For example,
‡ Stick it onto the dashboard.
‡ Or, clip it on the sun-shield.
Pair the Bluetooth-enabled
devices
To connect your Bluetooth device to the unit,
you need to pair the device to the unit. Pairing
needs only to be done once.
You can pair up to eight devices.