Reset; Replace Fuse - Philips CID2780 User Manual

Tip
‡
If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.

Reset

When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
Tip
‡
When the unit is reset, all the settings remain
unchanged.
32 EN

Replace fuse

If there is no power, the fuse may be damaged
and need to be replaced.
1
2
3
4
RESET
If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction.
In this case, consult your Philips dealer.
Take out the unit from dashboard.
Check the electric connection.
Buy a fuse that matches the voltage of the
damaged fuse (15A)
Replace the fuse.