JOCCA 2340 Instruction Manual page 7

English EN
-Unwind the power cord completely to prevent overheating.
-This device will only be totally disconnected when it is unplugged from
the mains.
-Do not use the appliance with wet hands or bare feet.
-Do not cover the air vent with the appliance in operation.
-Do not use means to accelerate the defrosting process or to clean, other
than those recommended by the manufacturer.
-The appliance shall be stored in a room without continuously operating
ignition sources (for example: open flames, an operating gas appliance
or an operating electric heater.)
-Do not pierce or burn.
-Be aware that refrigerants may not contain an odor.
-Appliance shall be installed, operated and stored in a room with a floor
area larger than 4m .
2
-Keep any required ventilation openings clear of obstruction.
-Servicing shall be performed only as recommended by the manufacturer.
-The appliance shall be stored in a well-ventilated area where the room
size corresponds to the room area as specified for operation.
-Any person who is involved with working on or breaking into a refrigerant
circuit should hold a current valid certificate from an industry-accredited
assessment authority, which authorizes their competence to handle
refrigerants safely in accordance with an industry recognized assessment
specification.
-Servicing shall only be performed as recommended by the equipment
manufacturer.
-Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person
competent in the use of flammable refrigerants.
-All working procedure that affects safety means shall only be carried by
competent persons.
Notes:
-The air conditioning is only suitable for indoor use, and is not suitable
for other applications.
-Follow local grid interconnection rules while installing the air conditioning
and ensure that it is properly grounded. If you have any question on
electrical installation, follow the instructions of the manufacturer, and if
necessary, ask a professional electrician to install it.
-Place the machine in a flat and dry place and keep a distance of above
50cm between the machine and the surrounding objects or walls.
7