JOCCA 2340 Instruction Manual page 12

EN English
Operation temperature range
Degrees Celsius (°C)
Cautions for cooling and dehumidifying operations:
- When using functions on cooling and dehumidifying, keep an interval of at least 3
minutes between each POWER.
- Power supply meets the requirements.
- The socket is for AC use.
- Do not share one socket with other appliances.
1. Cooling operation
- Press the "Mode" button till the "Cool" icon appears.
- Press the " "or"
- Press the "Fan Speed" button to select wind speed.
2. Dehumidifying operation
Press the "Mode" button till the "Dehumidify Indicator Lamp" blinks
- Set the selected temperature to current room temperature minus 2°C.
(16°C-31°C)
- Set the fan motor to LOW wind speed.
3. Fan operation
- Press the "Mode" button till the "Fan" icon appears.
- Press the "Fan Speed" button to select wind speed.
4. Timer operation
Timer ON setting:
- When the air-conditioner is OFF, press the "Timer" button and select a desired
ON time through the temperature and time setting buttons.
- "Preset ON Time" is displayed on the operation panel.
- ON time can be regulated at any time in 0-24 hours.
Timer OFF setting:
- When the air-conditioner ON, press "Timer" button and select a desired OFF time
through the temperature and time setting buttons.
- "Preset OFF Time" is displayed on the operation panel.
- OFF time can be regulated at any time in 0-24 hours.
5. Drainage mode
1. Condensate automatic evaporation drainage
The machine can automatically evaporate condensed water and discharge it through
the exhaust pipe In the refrigeration and dehumidification mode, the machine does not
need to connect the drainage pipe for drainage, please ensure that the water plug of
the machine has been installed.
2. Continuous drainage
Refer to the installation guide below.
3. Water filled with alarm
- When the water tank is full, the indicator light will be on, the buzzer will sound 5 times,
12
Maximum cooling
18º
"button to select a desired room temperature. (16°C-31°C)
Minimum cooling
35º