Do not modify the product or use spare parts from other suppliers than Geovent, as this may hamper the product The manual must be read in full and understood before and the function.
HVU Solo 450 HVU Solo 550 3.1. Description HVU Solo 700 The Geovent HVU Solo is a compact high vacuum unit for HVU Solo 1000 1539 use with a filter cyclone to collect dust or other particles. HVU Solo 1450...
EN 60 204-1 standard, which requires the connection of a manual switch. The switch will typically be located 2 - 3 1. Place the HVU Solo on a solid foundation (e.g. a con- meters from the unit and must be clearly visible.
Check that the whole system is completely tight. In case of squeaking, the leakage should be localized and sea- led with sealant. It is recommended to check whether the HVU Solo de- livers the air volume for which the system is dimensio- ned.
9.0 Troubleshooting 10.0 Dismantling, disabling and scrapping In the event that problems occur, the following items Deactivate the product by disconnection the electrical should be reviewed: mains. Dismantle compressed air pipes and other pipes or wires etc. and dispose of it according to local regula- Air volume or pressure is less than stated tions.
Wear on parts such as filter cartridges and hose is not included in the warranty. User liability In order for Geovent to be capable of granting the decla- red warranty, the user/fitter must follow this instruction manual in all respects.
DK-8831 LØGSTRUP Hereby declares that: The product: Model: HVU Solo Complies with the relevant parts of the following directi- ves and standards: Directive 2006/42 / EC of the European Parliament and of the Council of 17 May 2006 on machines and amen- ding directives 95/16 / EC.
Need help?
Do you have a question about the HVU Solo and is the answer not in the manual?
Questions and answers