KINGSLEY - BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR YOUR
ROUND COFFEE TABLE
STEPI
:
Unpaclg inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assembly of furniture please match joints with the corresponding ietter or numbers.
STEP II
:
Place the TABLE TOP face down and carefully insert the LEGS tenons into the respective mortise
joints of the TABLE TOP. Tenon joints of the LEGS will be marked
with a number or letter to
correspond with the respective mortise hole of the leg support. Insert all four leg tenons into
the
respective mortise joints of the TABLE TOp.
STEP Itr
:
Drive the wooden dowel through the tenons of the LEGS. One dowel should be driven through
each
tenon for all tables. Drive the dowel using direct sharp blows with a hammer. Take care noito
*-
the wood. You may want to sand lightly to smooth out any rough edges.
Carefully take the TABLE BASE and insert the LEGS trnonr intJrespective mortises
of the
TABLE BASE. Make sure that the numbered or lettered tenons match the mortises.
Using a rubber
hammer or a regular hammer with a wood block between the hammer and
the wood, drive the
tenon and mortise together until all joints snugly fit together.
STEP IV
:
Drive the wooden dowel through the tenons of the LEGS. one
dowel should be driven through each
tenon for all tables. Drive the dowel using direct sharp blows
with a hammer. Take care not to mar
the wood. You may want to sand lightly to smooth
out any rough edges.
IF YOU HAVE ANY QUESTIONS REGARDING
ASSEMBLY OF YOUR ROI.]ND CAFFEE
TABLE, PLEASE CONTACT A KINGSLEY-BATE
DEALER NEAREST TO YOU OR
KINGSLEY.BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURMTURE.
* KINGSLEY-BATE
WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF TTIESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
Need help?
Do you have a question about the TR01 and is the answer not in the manual?
Questions and answers