Page 2
KINGSLEY - BATE Fine Garden Furniture ASSEMBLY INSTRUCTIONS FOR THE TR - 122 TABLE TOP ASSEMBLY EXTENSION TOPS FOLDING LEG ASSEMBLY LOCKING PIN LOCATING PIN STEP-I Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood. NOTE: During assembly of the furniture pleas e match the tenons and m ortise holes with the corresponding letters or numbers stamped on the furniture.
Page 3
STEP-IV: Fit the num bered tenons of the LEG STRETCHERS into the respective m ortise holes of the LEG/BASE ASSEMBLY. Place the remaining LEG/BASE ASSEMBLY mortise holes onto and over the tenons of the LEG STRETCHER. With a rubber mallet, hammer the wood until all the joints fit snugly together.
Page 4
LOCKING PINS. IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR CHOOSING OUR FURNITURE. * KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE...
Need help?
Do you have a question about the TR122 and is the answer not in the manual?
Questions and answers